My new toy - mud - last weekend.
Trending Topics
#13
Thankyou Gordy, well being BS's wife, i suppose you could say i was his plaything.
< nudge, nudge, if you know what i mean!>
We make it our mission to get very dirty at the weekends
< nudge, nudge, if you know what i mean!>
We make it our mission to get very dirty at the weekends
#19
Scooby Regular
Join Date: Dec 2000
Location: In a village in Hants
Posts: 1,708
Likes: 0
Received 0 Likes
on
0 Posts
Used to be into that big time and had some right good laughs. Trouble was the mud would stay on there forever no matter how many times it was cleaned.
I used to have a Hilux 4x4 with Cossy engine and that would really fly. Also had 33x12.50x15 tyres. Also had a SJ with a 1.9td Pug engine and that was literally a go anywhere 4x4 with breathers, diff locks, etc
Even went to Malaysia, Borneo and Thailand for trials and competitions...
Nath
I used to have a Hilux 4x4 with Cossy engine and that would really fly. Also had 33x12.50x15 tyres. Also had a SJ with a 1.9td Pug engine and that was literally a go anywhere 4x4 with breathers, diff locks, etc
Even went to Malaysia, Borneo and Thailand for trials and competitions...
Nath
#23
Moderator
iTrader: (1)
wayhey join the club
Out up to Ironbridge this Sunday if any luck.
Need to see if the 2 E-type jag tailpipe will clog up with mud
1972 3.5 Rangie v8 and lazy autobox in mine. Bigends knakered, tappets kanckered, camshaft knackered. 1psi oil pressure when hot
But she'll still do the 50mile round trip there and back at 70mph up the rabbit run!
Out up to Ironbridge this Sunday if any luck.
Need to see if the 2 E-type jag tailpipe will clog up with mud
1972 3.5 Rangie v8 and lazy autobox in mine. Bigends knakered, tappets kanckered, camshaft knackered. 1psi oil pressure when hot
But she'll still do the 50mile round trip there and back at 70mph up the rabbit run!
#25
I used to have a V8 lightweight.
Went to the states for a year and left it with a mate.
Got back and the ****** had b@stardised it to keep his going and all I had left was a rolling chassis.
Went to the states for a year and left it with a mate.
Got back and the ****** had b@stardised it to keep his going and all I had left was a rolling chassis.
#27
On sunday we got pretty silly and went in some seriously deep water pits and up and down some mad inclines and declines.
Nearly rolled it a couple of times and at least one wheel was off the floor most the time.
The place out at Fourmarks is great. £10 for all day.
I didn't get stuck once and ended up pulling out V8 landies, Niva Cossaks, etc.
I haven't cleaned it and it is sitting outside work now, still caked in mud (Inside and out) lowering the tone of the neighbourhood.
Nearly rolled it a couple of times and at least one wheel was off the floor most the time.
The place out at Fourmarks is great. £10 for all day.
I didn't get stuck once and ended up pulling out V8 landies, Niva Cossaks, etc.
I haven't cleaned it and it is sitting outside work now, still caked in mud (Inside and out) lowering the tone of the neighbourhood.
#29
Moderator
iTrader: (1)
Found our lighty on the side of a welsh valley - been stuck there for the best part of 13 odd years.
All up and running now. But planning for the next mods 130bhp is'nt enough (well, its more like 100 with knackered cam)
Trying to source an EFi Rangie engine and a ZF auto and transfer box. Got most of the EFi bits just need the whirry bits
All up and running now. But planning for the next mods 130bhp is'nt enough (well, its more like 100 with knackered cam)
Trying to source an EFi Rangie engine and a ZF auto and transfer box. Got most of the EFi bits just need the whirry bits
#30
Stevie.
No mate. I am deadly serious. Just waiting for this engine to give up. Not too long now as it's burning loads of oil and the cluch is fecked.
Then it's off to find a donor engine and box and getting to work on it.
I'll post pics up oince I have done it.
No mate. I am deadly serious. Just waiting for this engine to give up. Not too long now as it's burning loads of oil and the cluch is fecked.
Then it's off to find a donor engine and box and getting to work on it.
I'll post pics up oince I have done it.