Aftermarket Steering Wheel Users! (big favour)
#1
Aftermarket Steering Wheel Users! (big favour)
Hi guys as you all know I have a Leggy but getting bits for it aren't as easy as for the Imp although a lot of pieces are interchangeable, the Aftermarket parts that are said to fit are few and far between.
This is the favour, as I have been looking for a boss that will fit my car for ages so that I can put my steering wheel on. the only one's that I can find listed for my car are these:
http://www.demon-tweeks.co.uk/Applic...d=41429-1766-C
Now ok they might fit but look like something from the 70's in fact I have the MOMO one on the Mexico!
These Items are also listed to fit the Imp so my guessing is that what should fit the Imp should fit the Leggy, But no one I speak to is willing to sell me a part that isn't listed for the Leggy and then take it back if it doesn't fit?
"I JUST WANNA FIT MY WHEEL!"
So anyway the big FAVOUR is will anybody who has an aftermarket let me try it?
Help would be muchly appreciated,
Russ!
This is the favour, as I have been looking for a boss that will fit my car for ages so that I can put my steering wheel on. the only one's that I can find listed for my car are these:
http://www.demon-tweeks.co.uk/Applic...d=41429-1766-C
Now ok they might fit but look like something from the 70's in fact I have the MOMO one on the Mexico!
These Items are also listed to fit the Imp so my guessing is that what should fit the Imp should fit the Leggy, But no one I speak to is willing to sell me a part that isn't listed for the Leggy and then take it back if it doesn't fit?
"I JUST WANNA FIT MY WHEEL!"
So anyway the big FAVOUR is will anybody who has an aftermarket let me try it?
Help would be muchly appreciated,
Russ!
#3
Still need to see you for the perspex cooling plate too which I never came and got!
I'll see you in 5! Only joking mate, let me know when your free and I'll pop over, I'm free whenever and text me ya postcode if ya still got my number!
Russ!
#4
Scooby Regular
iTrader: (4)
Joined: Jul 2001
Posts: 10,429
Likes: 0
From: MSOC..........middlesex subaru owners club
sorry Russ I deleted your number after you spat the dummy about the poor brakes issue
only joking mate
As for the cooling plate, mine cracked
I will still do you one though if you want
only joking mate
As for the cooling plate, mine cracked
I will still do you one though if you want
#5
I would probably not be putting it through as much stress as yours went through plus it must had been on and off so many times with all the probs you've had with the Ol' Girl! lol! Luvs ya!
Just let me know when your not busy fella!
Cheers!
Anyone else? Maybe with a GC or GD I'm guessing I'll need to try a few please?
Russ!
#7
Trending Topics
#10
http://www.greenline.jp/catalogue/bc...bcat=Boss+Kits
I will hopefully have one by the time you are back but if not it would be great to see if it fits?
Cheers chap,
Russ!
#11
Scooby Senior
iTrader: (51)
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
That would be handy mate thanks, It was a Works bell one I originally saw!
http://www.greenline.jp/catalogue/bc...bcat=Boss+Kits
I will hopefully have one by the time you are back but if not it would be great to see if it fits?
Cheers chap,
Russ!
http://www.greenline.jp/catalogue/bc...bcat=Boss+Kits
I will hopefully have one by the time you are back but if not it would be great to see if it fits?
Cheers chap,
Russ!
#12
Firstly a big THANKS to Mr B' today for allowing me to strip down my steering in his garden (sorry for nicking ya space Jacks!) and also letting me ava poke round the beastie for clues!
My God still no luck in fitting and looks like I'm gunna have to mod and Frankenstein a Momo boss that is said to be the correct one for my car! and still not sure how I'm gunna run the horn may need to run a switch to my dash!
Russ!
My God still no luck in fitting and looks like I'm gunna have to mod and Frankenstein a Momo boss that is said to be the correct one for my car! and still not sure how I'm gunna run the horn may need to run a switch to my dash!
Russ!
Last edited by Sketch; 19 May 2011 at 09:35 PM. Reason: spelling!
#13
Scooby Senior
iTrader: (51)
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Take my cracked works bell one and tinker with it, you may find the design of the WB gives yiu more freedom to tweak it. You can also check out the wiring that comes with it, but the horn should be easy.
#14
That would be really handy, do you still run a aftermarket?
Just seeing the way its wired up might give me a clue?
Anytime your free please mate, if you could Pm your Postcode and best time to pop round.
Ta,
Russ!
#15
Scooby Senior
iTrader: (51)
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
The car's here until tomorrow afternoon and then goes off for a respray. If you get around tomorrow after 2:30 I'll be around, and yes I still have an aftermarket fitted
PM on it's way
PM on it's way
#16
#18
Ok now I need to say a massive THANKS to JonMc as without him my car would still look like a throw back to the 60's!
New wheel fitted!
I know the horn says TYPE R but will change that ASAP!
We finally found a Boss that would fit without loosing my indicator delete and my horn! So Pete if you wanna get a new Boss you need a Works Bell but you would need to get back all the stuff that was taken out to fit your set up?
Jon Mate on the way home stopped at that NUT&BOLT place and got some better Allen key bolts, needed to take the wheel back of anyway as it wasn't straight whilst driving, dunno how that happened as made sure wheels were straight before taking it off? also pulled the dash out to remove the air bag bulb which was handy as my MPH sticker was starting to peal off so stuck that back on JOB DONE!
Also fitted the Richbrook Gear ****! That also was a task as had to Dremel out the centre so it would fit!!!
Jon how did the drop off go hope all is well?
Russ!
New wheel fitted!
I know the horn says TYPE R but will change that ASAP!
We finally found a Boss that would fit without loosing my indicator delete and my horn! So Pete if you wanna get a new Boss you need a Works Bell but you would need to get back all the stuff that was taken out to fit your set up?
Jon Mate on the way home stopped at that NUT&BOLT place and got some better Allen key bolts, needed to take the wheel back of anyway as it wasn't straight whilst driving, dunno how that happened as made sure wheels were straight before taking it off? also pulled the dash out to remove the air bag bulb which was handy as my MPH sticker was starting to peal off so stuck that back on JOB DONE!
Also fitted the Richbrook Gear ****! That also was a task as had to Dremel out the centre so it would fit!!!
Jon how did the drop off go hope all is well?
Russ!
#21
Can't wait to see the Bug when its back! When is it due back again?
Thanks to both you guy's and see you on Tuesday "CHEESE!"
Russ!
#24
Bet you can't wait , it's prob good that your away so your not sitting around waiting for it!
Oh really? "You Peach!"
Quote:
Default note date changed
THE DATE FOR THE MSOC PHOTOSHOOT HAS CHANGED TO THE 24TH MAY AT 7.00PM
HOPE TO SEE YOU ALL THERE
I make the 24th Tuesday!!!
Russ!
Oh really? "You Peach!"
Quote:
Default note date changed
THE DATE FOR THE MSOC PHOTOSHOOT HAS CHANGED TO THE 24TH MAY AT 7.00PM
HOPE TO SEE YOU ALL THERE
I make the 24th Tuesday!!!
Russ!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM