projector hi beams
#1
Scooby Regular
Thread Starter
Join Date: Oct 2010
Location: Kings Norton, birmingham
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
projector hi beams
ok so got the projectors in and working, in a way. When i switch to high beams the lows shut off till i revert back to low and alls ok. I know its not the new projectors as i had the same happen woth the other lighting setup. any ideasplease.:
#3
Scooby Regular
iTrader: (2)
Let me get this straight.
At present:
Your dip beams work perfectly, as do the mains, but when main beam is selected, the dip beam goes off?
What you want to happen:
When main beam is selected, the dips stay on?
If the above is correct, you can do it using a single on/off relay, 4-terminal, available for about £2 off t'internet or £5 from Hellfrauds.
Let me know if that's what you want and I'll explain, plus post where you can buy the cable, relay, fuse etc from online.
Do you have a circuit tester? One like this is helpful: http://www.ebay.co.uk/itm/CAR-CIRCUI...item5d414c412e
At present:
Your dip beams work perfectly, as do the mains, but when main beam is selected, the dip beam goes off?
What you want to happen:
When main beam is selected, the dips stay on?
If the above is correct, you can do it using a single on/off relay, 4-terminal, available for about £2 off t'internet or £5 from Hellfrauds.
Let me know if that's what you want and I'll explain, plus post where you can buy the cable, relay, fuse etc from online.
Do you have a circuit tester? One like this is helpful: http://www.ebay.co.uk/itm/CAR-CIRCUI...item5d414c412e
Thread
Thread Starter
Forum
Replies
Last Post
MTR
Lighting and Other Electrical
17
31 March 2004 06:08 PM
jah
Lighting and Other Electrical
1
04 September 2001 09:08 PM