jim16v

hi, i recently bought some second hand morrette lights for my bugeye wrx , had them painted and yesturday decided to fit them, fitted the n/s/f light and installed the power loom that goes to the battery, i then ran the two wires to the o/s/f light which i can only guess should connect to the light/relay, now this is the problem, there is no where on the o/s/f light to attach the two wires (power/earth ) as a result i have no main beam on the o/s/f ,


please somebody help!!!!!!!!!!!!!!!!!!!!!!!!

borderlinechris

iTrader: (5)

this is the back of my morettes that i havent got round to fitting yet.. dunno if this helps you..

dunx

iTrader: (3)

One of the NYSOC is a wiring-platter, have a look on their web-site, save you some mileage....

jim16v

thanx for the help, will have a look

dunx

iTrader: (3)

Jim !

Mail-box full !

jim16v

now empty :-)

Fizz

iTrader: (1)

that wiring doesn't look right.. IIRC the wires to the high beam don't look right... I'm sure the power to the main beam for at least one of the wires comes from the N/S/F wiring.. Can't promise but I'll have a look if I remember...

jim16v

that would be great if you could, pictures even better,