Looking for gauges, EGT, Oil Pressure and boost
#1
Looking for gauges, EGT, Oil Pressure and boost
Hello All
Looking for a set of gauges to fit in my MY93 Classic
Oil Pressure
EGT
Boost Pressure
Small Guages preferably
Also will need the sensors to suit
Going to put egt in hole for lamba sensor in my downpipe (currently has blank in there)
What will I need for oil pressure??
Allready have 60mm (too big) boost gauge in car so got stuff for that
Links to where I could buy them and mounts would be so helpful
Cheers
Rob
Looking for a set of gauges to fit in my MY93 Classic
Oil Pressure
EGT
Boost Pressure
Small Guages preferably
Also will need the sensors to suit
Going to put egt in hole for lamba sensor in my downpipe (currently has blank in there)
What will I need for oil pressure??
Allready have 60mm (too big) boost gauge in car so got stuff for that
Links to where I could buy them and mounts would be so helpful
Cheers
Rob
#3
Scooby Regular
iTrader: (1)
Omori/HKS make some 45mm gauges that would fit in the spare DIN you have above/below the stereo. Or you could just get some 50mm gauges (Defi, autometer, HKS, Greddy, Smiths etc etc) and fit them in a 3 gauge a pillar god from somewhere like JW Racing.
The gauges will come (normally) with all the sensors you need. Or the place you buy them from will recommend a suitable sensor. Oil pressure can be taken from the same place as the standard low pressure switch behind/to the right of the PAS pump.
Tony.
The gauges will come (normally) with all the sensors you need. Or the place you buy them from will recommend a suitable sensor. Oil pressure can be taken from the same place as the standard low pressure switch behind/to the right of the PAS pump.
Tony.
#4
Originally Posted by Tone Loc
Omori/HKS make some 45mm gauges that would fit in the spare DIN you have above/below the stereo. Or you could just get some 50mm gauges (Defi, autometer, HKS, Greddy, Smiths etc etc) and fit them in a 3 gauge a pillar god from somewhere like JW Racing.
The gauges will come (normally) with all the sensors you need. Or the place you buy them from will recommend a suitable sensor. Oil pressure can be taken from the same place as the standard low pressure switch behind/to the right of the PAS pump.
Tony.
The gauges will come (normally) with all the sensors you need. Or the place you buy them from will recommend a suitable sensor. Oil pressure can be taken from the same place as the standard low pressure switch behind/to the right of the PAS pump.
Tony.
#5
Scooby Regular
Join Date: Oct 2002
Location: leicester
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
http://www.stiracing.com/product.php?cat_id=6&id=297
hope this helps.
I was told that to buy and pay for fitment would be around £600
hope this helps.
I was told that to buy and pay for fitment would be around £600
#6
Originally Posted by ARM-Scooby
http://www.stiracing.com/product.php?cat_id=6&id=297
hope this helps.
I was told that to buy and pay for fitment would be around £600
hope this helps.
I was told that to buy and pay for fitment would be around £600
Have emailed them to see if they do the Din Defi 3 pod system with diffo gauges as they have two x temp 1 x pressure
I want
EGT
Boost
Oil Temp or Pressure
Anyone else know of any other places I could try?
Cheers
Rob
Trending Topics
#8
Originally Posted by martyrobertsdj
have emailed them with enquiry.... Looks like I have to order from japan.
Going for
45mm Guages with din fitting
EGT & sensor Electrical
Oil Pressure & sensor Electrical
Boost Pressure mechanical American version in lb's up to 25Lb P.no AMCO-025-BZ http://www.omorimeter.com/images/45_Boost.htm
is that the correct boost pressure one?? i am running 1.5bar...
Cheers
Rob
Thread
Thread Starter
Forum
Replies
Last Post