Re: Indicator Flash
#1
I have a small problem with the Right Hand Indicator only, it flashes at a faster rate the left hand signal !!
Is a fuse on the way out or is it an earthing problem.
Any help would be appreciated !
Is a fuse on the way out or is it an earthing problem.
Any help would be appreciated !
#3
I have re-located my front indicators into my Sidelights in the form of Orange bulbs and changed the connectors over, however either of the indicators (Left&Right) flash very fast when signaling.
However Hazzard lights (all four together) flash OK.
Figure that one out ????????????
However Hazzard lights (all four together) flash OK.
Figure that one out ????????????
#6
A resistor will only make things worse .... side light lamps are 5 watt ( or less?), indicator lamps are 21 watt, hence a lower element resistance .
You need more wattage to make them function ... change the lamps to 21 watts!!
You need more wattage to make them function ... change the lamps to 21 watts!!
#7
Scooby Regular
iTrader: (2)
TypeR: undo one bolt at the lower outer edge of the foglight. This also holds the indicator, which is held at the back by a bent bracket: it'll probably fall off into your hand!
Take the bulb holder in one hand, and the indicator in the other, and gently turn the bulbholder, anti-clockwise i think.
The bulb comes out as normal,(twist etc), but do be careful to get the right sort of replacement: the ones on the Scoob are different to some, take the old one with you, to save a wasted journey.
Alcazar
Take the bulb holder in one hand, and the indicator in the other, and gently turn the bulbholder, anti-clockwise i think.
The bulb comes out as normal,(twist etc), but do be careful to get the right sort of replacement: the ones on the Scoob are different to some, take the old one with you, to save a wasted journey.
Alcazar
Trending Topics
#8
Sorry to hijack your thread Type-R.
I have only re-located the indicators into the side lights and kept the current wiring so why is it like this ??
When the hazzards are on they flash fine it's just when i indicate that they flash fast ??????
I have only re-located the indicators into the side lights and kept the current wiring so why is it like this ??
When the hazzards are on they flash fine it's just when i indicate that they flash fast ??????
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM