could someone tell me the best way to run wires for tweeters, i used to have them dash mounted but now moving them to the door, the crossover is under the dash, im trying to work out the best way to run the wire from the crosover

thanks in advance everyone

 

If it's not a £1k + system just use the existing wire into the door and put the crosssover on the back of the door card.

 

Agreed

Just wired mine into the door using the existing wiring, have the crossover taped to the plastic sheeting on the inside of the door panel, works OK.

j

 

Mines glued to the door card itself - slightly stiffer mounting.

 

spot on lads, cheers