2 pot rear brake conversion brackets
30 May 2006, 05:59 PM
#1
Scooby Regular
Thread Starter
2 pot rear brake conversion brackets
Due to the badgering I get through PM and email I have relented and started another GB for these brackets 
How would you like your classic to have these brakes on the rear?
Using these.
Easy DIY fitting with full instructions (see Link below)
I need 6 people to make it worthwhile doing a run, but I'm sure if we get more it won't be a problem.
All those that have expressed an interest in these over the last few months will have a PM shortly.
These brackets allow you to fit the New age (MY01>) WRX 2 pot rear calipers and discs to any Impreza/Legacy currently fitted with single piston sliding rear calipers.
All you need are the Calipers, discs and pad from a MY01-05 WRX (Not STI or Classic JDMs as the discs are different, though the calipers can be used) and this bracket kit.
The kit will contain a pair of brackets and mounting bolts.
No special tools are needed to fit so no drilling or tapping of threads. They are a direct bolt on!!
Fitting instructions with pics here: http://bbs.scoobynet.co.uk/showthread.php?t=428646
I ran the calipers on my car at Scooby Shoot Out last year and they have had some hard use in the 25k miles since and they still look as good as the day I fitted them.
You will be impressed with the quality of the machining and when anodised look very professional. Anyone who knows me knows I'm a bit of a perfectionist, but the finish of these blew me away
This is the simplest way to upgrade your rear brakes to 2 pots. If you have a jack, a socket set and a little know how this is a doddle
The brackets will be hard anodised grey (sort of anthracite colour).
The bracket kit works out at £160 all in. (that includes anodising, mounting bolts and Postage)
Lead time is usually 4 weeks (TBC)
Get in before the rush
Iain.
How would you like your classic to have these brakes on the rear?
Using these.
Easy DIY fitting with full instructions (see Link below)
I need 6 people to make it worthwhile doing a run, but I'm sure if we get more it won't be a problem.
All those that have expressed an interest in these over the last few months will have a PM shortly.
These brackets allow you to fit the New age (MY01>) WRX 2 pot rear calipers and discs to any Impreza/Legacy currently fitted with single piston sliding rear calipers.
All you need are the Calipers, discs and pad from a MY01-05 WRX (Not STI or Classic JDMs as the discs are different, though the calipers can be used) and this bracket kit.
The kit will contain a pair of brackets and mounting bolts.
No special tools are needed to fit so no drilling or tapping of threads. They are a direct bolt on!!
Fitting instructions with pics here: http://bbs.scoobynet.co.uk/showthread.php?t=428646
I ran the calipers on my car at Scooby Shoot Out last year and they have had some hard use in the 25k miles since and they still look as good as the day I fitted them.
You will be impressed with the quality of the machining and when anodised look very professional. Anyone who knows me knows I'm a bit of a perfectionist, but the finish of these blew me away
This is the simplest way to upgrade your rear brakes to 2 pots. If you have a jack, a socket set and a little know how this is a doddle
The brackets will be hard anodised grey (sort of anthracite colour).
The bracket kit works out at £160 all in. (that includes anodising, mounting bolts and Postage)
Lead time is usually 4 weeks (TBC)
Get in before the rush
Iain.
Last edited by Dyney; 30 May 2006 at 06:01 PM.
31 May 2006, 07:43 PM
#5
Scooby Regular
Thread Starter
Steve,
I actually made a loss on the last GB (only a couple of quid though).
The price of the mounting bolts had gone up since last time
If you really want a set in bare Ali I can do it for £150
But I would recommend getting them anodised
Hard anodising is much better than the colours I did for the first GB and looks less tarty
I actually made a loss on the last GB (only a couple of quid though).
The price of the mounting bolts had gone up since last time
If you really want a set in bare Ali I can do it for £150
But I would recommend getting them anodised
Hard anodising is much better than the colours I did for the first GB and looks less tarty
01 June 2006, 06:12 PM
#6
hi mate. im looking to fit some rear brembo calipers to my classic with some newage wrx discs. im wondering if your brackets would work on these too. would you be able to measure the hole centres of the holes where it bolts on to the newage caliper for me so i can just check. cheerz
Last edited by rentonone; 01 June 2006 at 06:24 PM.
Trending Topics
04 June 2006, 11:48 PM
#11
Scooby Regular
Join Date: Mar 2006
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Ok dyney i'll sit here and wait just to let you know i've got the pads and disc's and the capilers ready now, i've i've put up a post at scoobycity if any one wanted them as well
Thanks leigh
just to let you know i've got the pads and disc's and the capilers ready now, i've i've put up a post at scoobycity if any one wanted them as well Thanks leigh
05 June 2006, 05:36 PM
#13
Scooby Senior
1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500
Think I'm going to need these!, let me know with regard to payment etc please
Can you confirm that they will fit my car ( 95 sti ra ) and that i need 02 wrx discs, pads and callipers ?
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500
Think I'm going to need these!, let me know with regard to payment etc please
Can you confirm that they will fit my car ( 95 sti ra ) and that i need 02 wrx discs, pads and callipers ?
Last edited by 500; 05 June 2006 at 05:45 PM.
06 June 2006, 03:53 PM
#15
Scooby Regular
Thread Starter
500,
Yes they will fit and yes you need new age WRX discs, pads and calipers
Looks like we have 6
I'll speack to the machine shop and get the ball rolling.
I'll mail you all when I have news
GB still open but get it quick. Once the order is placed that's it!!!!
Yes they will fit and yes you need new age WRX discs, pads and calipers
Looks like we have 6
I'll speack to the machine shop and get the ball rolling.
I'll mail you all when I have news
GB still open but get it quick. Once the order is placed that's it!!!!
12 June 2006, 05:06 PM
#16
Scooby Regular
Thread Starter
I have spoken to the Machine shop and they are waiting for me to give them final numbers, I'm waiting for 2 guys to let me know if they are in before I say GO!
I was also speaking to a mate over the weekend that recomended somewhere else to get them made.
I have a spare bracket so I dropped that off today for a quote.
Hopefully they can do it cheaper If not the original machine shop are on standby
I was also speaking to a mate over the weekend that recomended somewhere else to get them made.
I have a spare bracket so I dropped that off today for a quote.
Hopefully they can do it cheaper
If not the original machine shop are on standby
12 June 2006, 05:41 PM
#17
Scooby Regular
let me know as soon as the details are confirmed and I'll get the money to you as soon as possible, been keeping half an eye out for a set of these for a long time now
12 June 2006, 07:55 PM
#18
Scooby Regular
Thread Starter
List update
1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500
6. 5cby
7. armogedden57
8. vny66
Would all those on the list please PM/email me their real name, address and email addy please.
armogedden57 and vny66 don't worry I have you details
As soon as I have a price back from the other machine shops I'll place the order with whoever is cheapest and email every one where to send the money
1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500
6. 5cby
7. armogedden57
8. vny66
Would all those on the list please PM/email me their real name, address and email addy please.
armogedden57 and vny66 don't worry I have you details
As soon as I have a price back from the other machine shops I'll place the order with whoever is cheapest and email every one where to send the money
Last edited by Dyney; 12 June 2006 at 08:00 PM.
04 July 2006, 09:01 PM
#29
Scooby Regular
Thread Starter
Payment received thanks
I have had a call from the MAchine shop and the brackets are done!!!!
They had a slack Friday so did them then (Really wasn't expecting them to be done this quick!!)
I know need to pay for the machining before I can send them off for anodising and order the mounting bolts.
So those that haven't sent payment.... Do it ASAP
I have had a call from the MAchine shop and the brackets are done!!!!
They had a slack Friday so did them then
(Really wasn't expecting them to be done this quick!!)I know need to pay for the machining before I can send them off for anodising and order the mounting bolts.
So those that haven't sent payment.... Do it ASAP