2 pot rear brake conversion brackets
06 July 2006, 08:02 PM
#31
Scooby Regular
Thread Starter
Still waiting for all the payments to arrive.
Once I have them I will pick up the brackets and get them anodised and posted out.
Anodising only takes a day or 2.
Once I have them I will pick up the brackets and get them anodised and posted out.
Anodising only takes a day or 2.
08 July 2006, 05:16 PM
#33
Scooby Regular
Thread Starter
01 August 2006, 07:57 PM
#41
Scooby Regular
Join Date: Jun 2003
Location: Founder of surreyscoobies.co.uk
Posts: 2,889
Likes: 0
Received 0 Likes
on
0 Posts
Got mine Saturday morning 8.00 am, they were on the car and being tested at 10.00 am 
I had a few problems fitting them behind the handbrake cowling and had to grind a tiny bit off of the 2 corners to make them fit snug.
Thanks again Iain
I had a few problems fitting them behind the handbrake cowling and had to grind a tiny bit off of the 2 corners to make them fit snug.
Thanks again Iain
02 August 2006, 07:08 PM
#42
Scooby Regular
Thread Starter
Christain,
I wouldn't know I don't supply them
Call one of the breakers and ask
Glad to hear a few have landed safely so far.
Andy,
It depends how much af a hammering your hubs have taken in the past
When I fitted mine I found cleaning off the rust and opening the gap slightly was all that was needed
I wouldn't know I don't supply them
Call one of the breakers and ask
Glad to hear a few have landed safely so far.
Andy,
It depends how much af a hammering your hubs have taken in the past
When I fitted mine I found cleaning off the rust and opening the gap slightly was all that was needed
rear brake fitting kit
06 August 2006, 09:53 PM
#47
Scooby Regular
Theres a distict possibility I might sell mine - just bought a set of 4-pot for the rear and dont think I need these for the new breakes. Not 100% sure on this though and its going to take 3 weeks to get the brakes, so minimum time for a sale would be 3 weeks from now.
Originally Posted by binxta1
Hi DYNEY,
Are you still doing the group buy on these?please let me know as I need these for my mot.Cheers
Are you still doing the group buy on these?please let me know as I need these for my mot.Cheers
07 August 2006, 11:13 AM
#49
Scooby Regular
Thread Starter
binxta1,
YHPM
Unfortunatly this GB has finished.
5cby,
I'am looking into Brembo calipers at the moment.
The caliper will bolt to the bracket with a little modification to the bracket, but I have yet to try them on a car to see if they line up with the disc!
YHPM
Unfortunatly this GB has finished.
5cby,
I'am looking into Brembo calipers at the moment.
The caliper will bolt to the bracket with a little modification to the bracket, but I have yet to try them on a car to see if they line up with the disc!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
