2 pot rear brake conversion brackets
 

Due to the badgering I get through PM and email I have relented and started another GB for these brackets :rolleyes:


How would you like your classic to have these brakes on the rear? :)

http://www.zen24039.zen.co.uk/Scooby...nd%20disc2.JPG

Using these.

https://img.photobucket.com/albums/1..._fitting_1.jpg

Easy DIY fitting with full instructions (see Link below)

Attachment 60632

I need 6 people to make it worthwhile doing a run, but I'm sure if we get more it won't be a problem.
All those that have expressed an interest in these over the last few months will have a PM shortly.


These brackets allow you to fit the New age (MY01>) WRX 2 pot rear calipers and discs to any Impreza/Legacy currently fitted with single piston sliding rear calipers.
All you need are the Calipers, discs and pad from a MY01-05 WRX (Not STI or Classic JDMs as the discs are different, though the calipers can be used) and this bracket kit.

The kit will contain a pair of brackets and mounting bolts.
No special tools are needed to fit so no drilling or tapping of threads. They are a direct bolt on!!
Fitting instructions with pics here: http://bbs.scoobynet.co.uk/showthread.php?t=428646



I ran the calipers on my car at Scooby Shoot Out last year and they have had some hard use in the 25k miles since and they still look as good as the day I fitted them.
You will be impressed with the quality of the machining and when anodised look very professional. Anyone who knows me knows I'm a bit of a perfectionist, but the finish of these blew me away :)

This is the simplest way to upgrade your rear brakes to 2 pots. If you have a jack, a socket set and a little know how this is a doddle ;)

The brackets will be hard anodised grey (sort of anthracite colour).

The bracket kit works out at £160 all in. (that includes anodising, mounting bolts and Postage) :)

Lead time is usually 4 weeks (TBC)

Get in before the rush ;)
Iain.

is it still 140 without the anodising? like the last GB

steve

1. AP

any colour will do :thumb:

yes please can you put me for a set :luxhello: :luxhello:

Thanks very much leigh:) :)

Steve,
I actually made a loss on the last GB (only a couple of quid though).
The price of the mounting bolts had gone up since last time :rolleyes:

If you really want a set in bare Ali I can do it for £150 :)
But I would recommend getting them anodised :)

Hard anodising is much better than the colours I did for the first GB and looks less tarty ;)

hi mate. im looking to fit some rear brembo calipers to my classic with some newage wrx discs. im wondering if your brackets would work on these too. would you be able to measure the hole centres of the holes where it bolts on to the newage caliper for me so i can just check. cheerz

No the Brembo calipers don't fit with this bracket :(

The caliper mounting (hole centres) is different to the "Subaru" 2 pot

List so far:

1. andypugh2000
2. scoobyandscrappy
3. Andy

Dyney how much do you want we to sent? whats your address? and who should i make it payable to?

Thanks for sorting this out :luxhello: :luxhello:

Leigh

Guys,
I will mail you all payment details when I have enough people to place the order :)
I will not take any payments till then ;)

Ok dyney i'll sit here and wait ;) ;) just to let you know i've got the pads and disc's and the capilers ready now, i've i've put up a post at scoobycity if any one wanted them as well

Thanks leigh

I'll take a pair of these at that price:

1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52

Let me know as soon as you want payment.
cheers
will

1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500

Think I'm going to need these!, let me know with regard to payment etc please:thumb:

Can you confirm that they will fit my car ( 95 sti ra ) and that i need 02 wrx discs, pads and callipers ?

1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500
6. 5cby

oh go on then

500,
Yes they will fit and yes you need new age WRX discs, pads and calipers :)

Looks like we have 6 :D
I'll speack to the machine shop and get the ball rolling.
I'll mail you all when I have news ;)

GB still open but get it quick. Once the order is placed that's it!!!!

I have spoken to the Machine shop and they are waiting for me to give them final numbers, I'm waiting for 2 guys to let me know if they are in before I say GO!

I was also speaking to a mate over the weekend that recomended somewhere else to get them made.
I have a spare bracket so I dropped that off today for a quote.
Hopefully they can do it cheaper ;) If not the original machine shop are on standby :D

let me know as soon as the details are confirmed and I'll get the money to you as soon as possible, been keeping half an eye out for a set of these for a long time now ;)

List update :)

1. andypugh2000
2. scoobyandscrappy
3. Andy
4. Borat52
5. 500
6. 5cby
7. armogedden57
8. vny66

Would all those on the list please PM/email me their real name, address and email addy please.
armogedden57 and vny66 don't worry I have you details ;)

As soon as I have a price back from the other machine shops I'll place the order with whoever is cheapest and email every one where to send the money :)

Dyney pm sent thanks:luxhello:

PM sent :thumb:

Thanks guys :)

k m8, thanx, ad these 2 pots in garage for 3yrs now, n been lookin 4 a bracket ever since!!! so this is good news :-)

Hi dyney just seeing the brackets are doing? i cant wait to get it all sorted:lol1: :lol1:

Order has been placed :D
I will Mail you all in the next few days with instructions for payment :)

thanks looking forward it putting them on:luxhello: :luxhello:

Hi Iain

you have money in your acount :thumb:

:thumb:

Hi Iain the missis should of put the money into your acount today :norty: :norty: let me know if its gone thought ok :luxhello: :luxhello:

Payment received thanks :)

I have had a call from the MAchine shop and the brackets are done!!!!
They had a slack Friday so did them then :D (Really wasn't expecting them to be done this quick!!)

I know need to pay for the machining before I can send them off for anodising and order the mounting bolts.
So those that haven't sent payment.... Do it ASAP :)

when will these be posted out?