joe v3sti

iTrader: (8)

Hi guys I'm de cluttering my engine bay at the moment on my 95 sti type ra. I've done away with my resonator box and standard induction pipe work. I'm now running an air filter straight from the turbo inlet.

I disconnected the small pipe from my boost solanoid, however what do I now connect it to??

It's the one that comes from the bottom of the solanoid with te restrictor in.
in the pic.

Cheers guys

propofol

I think you can get away with leaving disconnected

1509joe

iTrader: (2)

Depends what engine management you have. If you have standard leave the pipe attached and cable tie etc out the way cause of restrictor. If you have after market EMS the solutions are endless ask your mapper.

joe v3sti

iTrader: (8)

The plan is alcatek. All other breathers etc have been run to a catch can

1509joe

iTrader: (2)

Well leave the pipe and restrictor until you get it mapped. Then your mapper will probably remove. The restrictor in the pipe helps regulate boost on a 3 port.