the shreksta

iTrader: (20)

as above

whats the best and most reliable pump to use for a blob wrx with sti lump running around 350bhp?

heard bad things about walbro and hrc seem cheap

roger clarks is on my doorstep and they do their own brand

cheers

jura11

iTrader: (7)

Hi there

I've run HRC 340LPH fuel pump without the problem at 490bhp and will be running again this pump on the 2.35L with 35R

Jura

the shreksta

iTrader: (20)

they just seem alot cheaper than anybody else and thats not always a good thing

stonejedi

iTrader: (51)

Any of the above fuel pumps you mentioned would be fine For that bhp,just make sure you buy from a reputable seller as there are a lot of copy's going around especially on the bay of (E).SJ

the shreksta

iTrader: (20)

yes matey i always buy from trusted places-its good to have the paperwork with it aswell

stonejedi

iTrader: (51)

As jura has said the HRC ones are good my wife has got a walbro pump that she has just brought for her car and I have just brought the RCM one as the quality and profile of the RCM pump is exactly what I need it really comes down to cost and your personal preference as they all do the job well,also don't forget the walbro pump was used by prodrive for there PPP Remaps on the STI.SJ.

Tidgy

got a walbrough 400 on my 2.5

tubbytommy

iTrader: (20)

I use a garden hose and get emma to suck it..

AS Performance

iTrader: (4)

have done Walbro for years with little if any issues (lost of dodgy copy ones around though as above)

new Walbro 400/450 is very good and also do Deatshwerks pumps........

the shreksta

iTrader: (20)

what sort of prices are they matey?

kad 16v

I had a walbro in my type 20 and was recommended by Bob Rawle to replace it with a HRC 340 LPH pump.

He told me they are a better pump, much more reliable and with a 2 year guarantee rather than 1 year that comes with the walbro.

Buy direct from HRC and get a better deal or buy from a supplier and they will cost you £175 quid

I collected mine from HRC direct and the guy is a genuine guy with a couple of imprezas, one being quite high powered.

Mine is being used to supply a swirl pot and bosch 044 pump so a bit of overkill but its a spot on setup

the shreksta

iTrader: (20)

do all the pumps deal with the oscillating voltage supply?

read here

http://www.rogerclarkmotorsport.co.u...productID=1301

kad 16v

I'm not sure I'd suggest speaking with HRC, being recommended by Bob Rawle I would think they are more than compatible.

trevsjwood

iTrader: (2)

I know this wont be to popular but the standard pump will run over 400hp, well maxed at 430hp on 20% meth to be exact. Most tuners never get anywhere near that so the reliability factor is rarely tested.
Trev

maydew

iTrader: (9)

i brought one for mine around 3 years ago they were pretty unheard off on here as searched around and took the chance anyway as was offering 2 year guarantee, only thing i really noticed was there quieter , i paid about £40 back then compared to £75 for the walbro