Notices

misfire in the morning when on boost

Thread Tools
 
Search this Thread
 
Old 27 January 2013, 10:22 AM
  #1  
scooby sparky
Scooby Newbie
Thread Starter
 
scooby sparky's Avatar
 
Join Date: Oct 2012
Location: norfolk
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default misfire in the morning when on boost

I don't know if anyone can help but the last two mornings I have started my car up let it warm up on the drive as I normally do before I go anywhere and it ticks over fine and it drives fine off boost but as soon as u get in to boost for the first 7 miles of driving it misfires and holds back but after the 7mile it is fine all day until the next morning where it all starts again.
It is my00 turbo 2000 wagon
it has got chav valve turbo back exhaust I think they are 8mm ht leads.
New spark plugs gapped to 0.7 new fuel filter and oil and filter change as of yesterday

thanks in advance for all your help
Old 27 January 2013, 10:40 AM
  #2  
staccato
Scooby Regular
 
staccato's Avatar
 
Join Date: Aug 2012
Location: Kent
Posts: 286
Likes: 0
Received 0 Likes on 0 Posts
Default

Has it done this since the new plugs, or before the plugs were changed. I had a Mazda 3 MPS which was heavily modified and I had trouble getting the right heat range of plugs. If I went too warm I'd have no issues with the misfiring in the morning, but the car would misfire under heavy load like wide open throttle pulls on the motorway. If I lowered the heat range of the plugs, the car would no longer hiccup on the motorway pulls but would splutter and misfire in the cold mornings. A temporary fix was to pour in a bottle of octane booster into the tank (a recommendation by a local tuner) and this solved it but got pricey. I finally sorted it by switching from denso plugs to NGK to get a better match of heat range
Old 27 January 2013, 11:05 AM
  #3  
ryansclassicscoob
Scooby Regular
 
ryansclassicscoob's Avatar
 
Join Date: May 2006
Location: brentwood, essex
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

was getting a misfire on my 2000 turbo when having it mapped, replaced the coil pack and the miss fire was gone off boost but still there when boosting, i replaced the plugs and thought all was well but after a few miles it came back . so it got a new set of leads and i couldn't believe the difference much crisper pickup and misfire was totally gone ,
Old 27 January 2013, 11:12 AM
  #4  
scooby sparky
Scooby Newbie
Thread Starter
 
scooby sparky's Avatar
 
Join Date: Oct 2012
Location: norfolk
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

I have had the car for just over a year and it has had the same plugs every service it just started to do it yesterday morning so I went home and changed the plugs but that has made no difference there is no fault codes loged in the ecu.
I am wondering if it could be a faulty coolant temp sensor.
thanks for your replies
Old 27 January 2013, 11:23 AM
  #5  
ryansclassicscoob
Scooby Regular
 
ryansclassicscoob's Avatar
 
Join Date: May 2006
Location: brentwood, essex
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

try new leads, didn't look like anything wrong with my old leads but obviously a bit tired i got my new ones from euro car parts for £44 and made such a difference.
Old 27 January 2013, 11:50 AM
  #6  
scooby sparky
Scooby Newbie
Thread Starter
 
scooby sparky's Avatar
 
Join Date: Oct 2012
Location: norfolk
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

I will try my old ones on it.
at the mo its got magnecor ones on it and they aren't that old.
Old 27 January 2013, 02:19 PM
  #7  
jazzyjembreaze
Scooby Regular
iTrader: (11)
 
jazzyjembreaze's Avatar
 
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes on 0 Posts
Default

I would change the plugs again / fairly common bad plug or gap - you should always gap your plugs yourself even if they are pre- gapped
& having a bad plug in the pack isn't a rare thing at all
Old 27 January 2013, 02:23 PM
  #8  
staccato
Scooby Regular
 
staccato's Avatar
 
Join Date: Aug 2012
Location: Kent
Posts: 286
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jazzyjembreaze
I would change the plugs again / fairly common bad plug or gap - you should always gap your plugs yourself even if they are pre- gapped
& having a bad plug in the pack isn't a rare thing at all
Agreed. Check the gaps, then go for a completely different brand. If that works then all is good!
Old 27 January 2013, 02:35 PM
  #9  
Turbotits
Scooby Regular
iTrader: (2)
 
Turbotits's Avatar
 
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes on 0 Posts
Default

At 7 miles its only just up to full operating temp. Probably is a plug issue. But i personally wouldnt be to bothered providing its ok once fully warmed. It will keep you off boost till its up to temp. Just coz the coolant guage is up to temp, doesnt mean the rest of the motor is

Last edited by Turbotits; 27 January 2013 at 02:37 PM.
Old 27 January 2013, 03:55 PM
  #10  
poolio74
Scooby Regular
 
poolio74's Avatar
 
Join Date: Sep 2009
Location: Devon
Posts: 583
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Turbotits
At 7 miles its only just up to full operating temp. Probably is a plug issue. But i personally wouldnt be to bothered providing its ok once fully warmed. It will keep you off boost till its up to temp. Just coz the coolant guage is up to temp, doesnt mean the rest of the motor is
Thats what i was thinking,but couldnt be arsed typing it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
psport
Subaru Parts
3
04 October 2015 07:35 PM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
GB270_CALUM
General Technical
4
01 October 2015 09:50 PM
mistermexican
General Technical
2
01 October 2015 04:30 PM
fumbduck
ScoobyNet General
18
29 September 2015 09:16 PM



Quick Reply: misfire in the morning when on boost



All times are GMT +1. The time now is 02:37 AM.