Anyone running a japspeed oil cooler?
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Cambridgeshire
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running a japspeed oil cooler?
I'm looking at getting a japspeed oil cooler but wondered if anyone has one fitted, what they think of it and where the pipe work supplied relocates it to as I'm looking to relocate mine to the osf fog light opening.
Any help is appreciated
Adam
Any help is appreciated
Adam
#2
might be of help, I had a mocal oil cooler fitted which was located NSF behind fog light cover, you can see on the pics below as it had holes drilled on the fog light cover.
I since had it removed, the reality is the oil was not really getting to a hot enough temperature for normal road use, even in the hottest of summer months without one i have not seen above 100degrees, in the colder months it really stopped the oil temp getting up to anything above 60 degrees when moving and as far as i am aware that would not even be optimum working temp for the oil, if you are going on track or running mega power then it might be worthwhile.
I since had it removed, the reality is the oil was not really getting to a hot enough temperature for normal road use, even in the hottest of summer months without one i have not seen above 100degrees, in the colder months it really stopped the oil temp getting up to anything above 60 degrees when moving and as far as i am aware that would not even be optimum working temp for the oil, if you are going on track or running mega power then it might be worthwhile.
#3
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Cambridgeshire
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
I'm planning to track it once I've got some other bits sorted....I'm only running 350bhp but with track use and the fact the factory one is so small and in such a stupid place to cool anything, thought it might be worth doing/need to be done
#6
Scooby Newbie
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM