blitz nurspec from classic - newage
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2009
Location: airdrie
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
blitz nurspec from classic - newage
A bit of advice needed please got a chance of a blitz back box from a classic , i know to go onto a newage the hangers need to be relocated but will the backbox sit nicely at the rear bumper or will it be shy or protude way out into the wilderness beyond the rear bumper, thanks for any replies. Car is a bugeye
kenny
kenny
#3
Scooby Regular
iTrader: (6)
Join Date: Jan 2002
Location: Hampshire
Posts: 953
Likes: 0
Received 0 Likes
on
0 Posts
Is it just a back box designed to fit the std system or is it from a complete system?
I've got a classic nur spec system sittting in my shed,it won't fit my 01 bug eye unless I fit a classic down pipe & decat,the bug eye down pipe & cat are around 4 inches longer than a classic so when I fitted the system nothing lined up,the whole thing was around 4 inches further back than it should have been.
I put the std centre pipe back on to see if just the back box would fit but had the same problem & also the 3" flange on the nur spec back box is too big to fit the std flange.
I've got a classic nur spec system sittting in my shed,it won't fit my 01 bug eye unless I fit a classic down pipe & decat,the bug eye down pipe & cat are around 4 inches longer than a classic so when I fitted the system nothing lined up,the whole thing was around 4 inches further back than it should have been.
I put the std centre pipe back on to see if just the back box would fit but had the same problem & also the 3" flange on the nur spec back box is too big to fit the std flange.
Thread
Thread Starter
Forum
Replies
Last Post
serpico
ScoobyNet General
20
01 April 2019 07:47 AM
supshon
General Technical
2
03 October 2015 08:06 PM