When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Will a v1sti long engine fit into a my97 UK turbo ?I know id have to use the peripherals off the my97(sensors,coilpack,alternator ,inlet manifold ,crossover pipe etc) but would i be able to use the v1sti heads ie will they line up with the v3 (my97) inlet manifold / loom
Inlet manifold will fit as Version1~4 have an inline bolt hole pattern for the inlet manifold.
Mick
Cheers for the info fella so even though the inlet manifold is a different shape (cos the inlet hoses pass under inlet manifold ) the stud pattern and inlet ports line up the same ?
Is there anything else, that i might have overlooked ,that will crop up during the conversion .or is it pretty much a straight swap bar inlet .cheers clive
26 February 2012, 05:32 PM
v1sti lump into my97
so even though the inlet manifold is a different shape (cos the inlet hoses pass under inlet manifold ) the stud pattern and inlet ports line up the same ?
