dump valve
#1
Scooby Regular
Thread Starter
dump valve
havin a few problems i have put a front mount intercooler on but the baileys dump valve will no longer fit. I know i have got to get a new 1 compatable with my piping but is there anything i can do in the mean while as i need to use the car not sure if i can just block up the pipe and the little rubber hose any help please thanks
#4
Scooby Regular
iTrader: (7)
Hi there
Yes is possible to fit yours bailey dv on FMIC,just contact here Harvey for adapter for yours DV.
Yes you can run without the DV,but mainly depends which turbo you have fitted and if its will be safe on longer run.
Just block hose and bung DV....
But i would recommend run off the boost until your car is mapped or get this remapped asap for safe reasons.
Jura
Yes is possible to fit yours bailey dv on FMIC,just contact here Harvey for adapter for yours DV.
Yes you can run without the DV,but mainly depends which turbo you have fitted and if its will be safe on longer run.
Just block hose and bung DV....
But i would recommend run off the boost until your car is mapped or get this remapped asap for safe reasons.
Jura
#7
Scooby Regular
Thread Starter
ta mate think its a td05 with ugraded actuator its a 2000 turbo but has few bits off a sti not 100% tho as its my first scooby and am just learnin will be getting the adapter but will take few days in post
Trending Topics
#8
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
Td05 should be fine without a dump valve. Ive been running without one for over 2 years. I assume your cars mapped for all the mods you have? If not dont cane it or run any boost till it is.
#9
Scooby Regular
Thread Starter
not sure only had it a month last owner said it had this and that but i dont know if he was just sayin half the stuff just to sell it am in the middle of havin it looked tho will it need to be remapped with the fmic or will it just run as b4 probley sound well stupid now lol
#11
Scooby Regular
Thread Starter
ok mate thanks for ur help il look into it monday asked about and most places wont touch the 2000 turbo they only do wrx or sti 1 place said they would do it upgrade the fuel pump and put platinum plugs in for 700 thought it was abit pricey but if i have got to have it with the fm il do it
#12
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
What year is the car? Many on here will map it dependant on the year will or may point to who you chose and where your from will help. We can then give you some pointers on who or what to use
#14
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
Ok ecutek on the original ecu. Jollygreenmonster.co.uk is probably your nearest. If its been mapped before you wont need a licence. Or if you want to spend more theres after market ecu's available
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
shorty87
Wheels And Tyres For Sale
0
29 September 2015 02:18 PM