dooby-do

iTrader: (2)

hi people im about to fit the oil pressure sender to my car but have noticed that it has 2 terminals rather than 1, im guessing 1 is an extra ground and the other terminal goes to the sender but need to make sure this is correct,
any advise would be grately aprriciated regards ben

alcazar

iTrader: (2)

Both of those ought to go to your gauge. How many connections does the gauge have?

dbay

iTrader: (21)

mine is wired up WK to earth and G to the gauge

dooby-do

iTrader: (2)

ok on the back of the gauge is the 3 wires red,yellow,black
plus 3 screws with - + and a s as picture shows so trying to wonder how i fit it

dooby-do

iTrader: (2)

so would it be wk to ground and then g to s what would the negative and posative be for on the back of the gauge

alcazar

iTrader: (2)

Gauge live, gauge earth and yellow for lighting?

What make of gauge is it? Did it not come with instructions?

dooby-do

iTrader: (2)

its a savage gauge i bought it for my c20let corsa around 2 years ago and never fitted. so now fitting it to my subaru i understand the wires of the gauge red,black,yellow but do i still need to use the neg and pos screw on the back of the gauge,and would it be wk to ground on the sender and g must fit on the back on the gauge which says s

dooby-do

iTrader: (2)

anybody?