Engine Light on due to Remap
#1
Scooby Regular
Thread Starter
Engine Light on due to Remap
My Bugeye was remapped by the previous owner, and it has since gained a niggling problem (which has been ongoing). Basically, when the car over-revs, or your miss a gear when giving it some beans, it triggers something do with emissions and causes the engine light to come on. As you can tell, i'm clearly very technical minded here
Weirdly, it stays on for 48 hours and disappears.
Any ideas how to resolve this permanantly?
Weirdly, it stays on for 48 hours and disappears.
Any ideas how to resolve this permanantly?
#4
Scooby Regular
iTrader: (7)
Hi there if you have Bugeye RWX(bugeye WRX have worst/sensitive camshaft sensor) and if you are hitting the rev limiter for few times ecu will trigger CEL-check engine light and after few starts will disappear....
This is common faults/error on Bugeye WRX...
And again if you have someone with obd reader will be good to find which error code has been(this code will be stored like historic code in ECU)
This is common faults/error on Bugeye WRX...
And again if you have someone with obd reader will be good to find which error code has been(this code will be stored like historic code in ECU)
#5
Scooby Regular
Thread Starter
Hi there if you have Bugeye RWX(bugeye WRX have worst/sensitive camshaft sensor) and if you are hitting the rev limiter for few times ecu will trigger CEL-check engine light and after few starts will disappear....
This is common faults/error on Bugeye WRX...
And again if you have someone with obd reader will be good to find which error code has been(this code will be stored like historic code in ECU)
This is common faults/error on Bugeye WRX...
And again if you have someone with obd reader will be good to find which error code has been(this code will be stored like historic code in ECU)
Might have to invest in an obd reader, don't wanna take any chances!
Trending Topics
#10
Scooby Regular
Join Date: Feb 2003
Location: CHIPP'N HAM
Posts: 3,931
Likes: 0
Received 0 Likes
on
0 Posts
Powerstation did my 2003 STI map and I kept getting a CEL.
O2 bank sensor... always came on after a longish journey
B Rawle remapped it in the end and CEL went away..
O2 bank sensor... always came on after a longish journey
B Rawle remapped it in the end and CEL went away..
Thread
Thread Starter
Forum
Replies
Last Post
TylerD529
Lighting and Other Electrical
5
20 September 2015 12:10 PM