Ecutek
Hi, I am new to scoobynet and was just after some advice. I have an 06 Sti which I was told was Andy Forest mapped to 360bhp and has got pops and bangs added. I know from driving it that there is no way it is 360bhp. I have a blitz nurspec exhaust on it. Does anyone know what power I could be achieving with the right remap and also any reccomendations on remaps?
Cheers
Cheers
Hi, I am new to scoobynet and was just after some advice. I have an 06 Sti which I was told was Andy Forest mapped to 360bhp and has got pops and bangs added. I know from driving it that there is no way it is 360bhp. I have a blitz nurspec exhaust on it. Does anyone know what power I could be achieving with the right remap and also any reccomendations on remaps?
Cheers
Cheers
Best way how to know your power output/BHP is Rolling Road.
Where are you based?
Check with Andy to confirm the remap and any estimation of power.
Sounds like a typical remap figure for the STi.
That's about as far as it can go without a turbo change, at which point it is also time to look at new pistons.
Sounds like a typical remap figure for the STi.
That's about as far as it can go without a turbo change, at which point it is also time to look at new pistons.
No, havent had it dyno'd yet. That is the next stage for me. Looking for someone to work on it with regard to remaps etc aswel. Need to get the pops and bangs taken off. Had a leon cupra before this which was running @ 300 bhp and this just doesnt feel as fast.
Trending Topics
Scooby Regular
iTrader: (3)
Joined: Aug 2000
Posts: 25,565
Likes: 2
From: 1600cc's of twin scroll fun :)
These wont feel as quick, their power is more progressive normally, I once did 155mph on the autobahn and didnt know I was doing said figure until I looked down at my speedo 
Tony

Tony
Do you have a boost gauge fitted as this would tell you which map it was running.
If it was only boosting say...10 psi it would be on low boost mode as opposed to say...... 20 psi.
Your best bet is to email Andy for more info.
As for pops and bangs.. it would need another re-map to remove them. or slow down more gradually through the gears so it doesn't come into play.
Last edited by BugEyedTony; Sep 19, 2010 at 02:22 PM. Reason: spelling!
Thread
Thread Starter
Forum
Replies
Last Post





