ryanaircon

iTrader: (3)

Hi does anyone know if a newage brake servo will fit a classic. My pedal is really hard, and just feels un-servo'd. Ididn't want to go for a second hand classic servo as they are all at least 10 years old now.

Any suggestions?

Thanks
Ryan.

dunx

iTrader: (3)

just swap the master cylinder...

dunx

ryanaircon

iTrader: (3)

Hi whats the advantage of that? i'm not getting enough pedal assistance from the servo.
Have you fitted a later type master cylinder?
Ryan.

dunx

iTrader: (3)

If you had Brembos fitted you need a bigger master cylinder to move enough fluid...

If your's is just poor, replace the valve in the vacuum pipe first ?

dunx

cwt

iTrader: (19)

Hi Dunx
Where is the Valve in the vacuum pipe??
And does this pipe fit into the servo itself???

Thanks in Advance

Craig.

ryanaircon

iTrader: (3)

Hi on a classic the valve is in the short rubber hose from the servo before it connects into the steel section. You'll have to sqeeze the pipe to feel it .


Thanks Ryan.