pug205

Hi there,hope someone can help i have 1998 WRX STi,code GC8E4ED, looking at some images on web my Boost Solenoid pipes seem connected wrong way round, ie top hose goes to Wastegate,mid hose goes to Turbo outlet,can anyone confirm this is correct? or if not any idea why they are connected up this way,boost does seem low but no CEL,s etc,any help/advice appreciated,Thanks

Glowplug

iTrader: (8)

https://www.scoobynet.com/scoobynet-...or-3-port.html

pug205

Cheers that was the image i was looking at pipes are basically opposite to what is shown, want to put back as image but, would like to know why would someone have them like that? or could it have been a genuine mistake, what effect will it have on car running like this? i know my boost can be low up .7 Bar sometimes spike to 1 bar, only mods i know of are decatted exhaust and panel filter

Bob Rawle

Thats the wrong diagram for your car, the pipe connection descriptions are correct but there is no restrictor in the bottom hose, the pic pointed to is of a MY93 to 96 vehicle. The STi 4 solenoid is plumbed to the same points but has a 1.5mm restrictor installed in the top hose adjacent to the solenoid.

cheers

bob

pug205

Thanks for that, yes top hose has a restrictor in it, but still connected to Wastegate acuator, so still need to swap them over as pic?,Ta