Notices
General Technical
Sponsored by:
Sponsored by: CARiD

HELP engine ticking

Thread Tools
 
Search this Thread
 
Old Sep 23, 2009 | 10:57 PM
  #1  
robinsonsmotors's Avatar
robinsonsmotors
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 76
Likes: 0
From: MELROSE , SCOTTISH BORDERS
Default HELP engine ticking

hi everyone, hoping someone can help. i had my car m.o.t'd on sat, i was told to get it as hot as poss for emmissions test (sportscat only) so gave it good run etc. while i was waiting for test, i heard my car redlined 6 or so times. emmissions pass so was happy, not about redlining though! anyway during a trip down to scoobyfest on sunday, sitting about 80 on motorway at 3000 revs ish, started to get a ticking noise.below 2800 and above 3200 its sillent. has anyone had this experience. to me noise sounds like its from camshaft area on the n/s ( battery side) thanks in advance for any comments / advise.
Reply
Old Sep 23, 2009 | 11:02 PM
  #2  
G-Man1982's Avatar
G-Man1982
Scooby Regular
iTrader: (7)
 
Joined: Apr 2009
Posts: 2,032
Likes: 0
From: DIESEL POWERED BORAT! SLAMMED, R32 WHEELS, MAPPED, DE-CAT, TINTS. LOVE IT!
Default

i had this and changed the bottom end!

good luck!

sure its not your injectors ticking you can hear? they are noisy
Reply
Old Sep 23, 2009 | 11:06 PM
  #3  
robinsonsmotors's Avatar
robinsonsmotors
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 76
Likes: 0
From: MELROSE , SCOTTISH BORDERS
Default

hi thanks for reply, would they just be noisy at 3k?
Reply
Old Sep 24, 2009 | 07:32 AM
  #4  
bigtel's Avatar
bigtel
Scooby Regular
 
Joined: Aug 2009
Posts: 110
Likes: 0
From: Essex
Default

My bottom end noise was only around 3000 revs, but did sound like a little man with a hammer in there rather than ticking tho.
Reply
Old Sep 24, 2009 | 09:21 PM
  #5  
robinsonsmotors's Avatar
robinsonsmotors
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 76
Likes: 0
From: MELROSE , SCOTTISH BORDERS
Default

it is quite load, you can hear it in the cabin with a fairly load exhaust. seems to be coming from n/s cylinder head. going to check valve clearances to see if any are out. i hope they are !!! Thanks for replies .
Reply
Old Sep 24, 2009 | 09:44 PM
  #6  
Mr-Confused's Avatar
Mr-Confused
Scooby Regular
 
Joined: Feb 2009
Posts: 104
Likes: 0
Default

Thought mine was a heat shield rattle as it was also only around 3000rpm

Turned out to be the big ends...
Reply
Old Sep 25, 2009 | 11:03 PM
  #7  
robinsonsmotors's Avatar
robinsonsmotors
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 76
Likes: 0
From: MELROSE , SCOTTISH BORDERS
Default

thanks for replies. managed to find the area where it is noisiest, no 4 cylinder (next to starter) seems to be more the area around the block / head join, possibly thinking may be piston rings? anyone had this?
Reply
Old Sep 25, 2009 | 11:08 PM
  #8  
swisstonihasher's Avatar
swisstonihasher
Scooby Regular
 
Joined: Jun 2006
Posts: 1,568
Likes: 0
From: South West
Default

Get a screw driver and put your ear to the end, then move it around the engine block and heads...you should be able to tell where noise worst - ticking tends to be top end not bottom but that not always the case. Good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
Oct 2, 2015 05:26 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
Baskey
General Technical
3
Sep 25, 2015 03:45 PM




All times are GMT +1. The time now is 06:28 AM.