Idle valve on my 97,where you at????
#1
Scooby Regular
Thread Starter
Join Date: Feb 2008
Location: put my v8 landrover aside lets play with the scooby
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Idle valve on my 97,where you at????
Hi guy's
Having a problem getting my impreza to idle today,a mate of mine said try the idle control valve. Its ticks over ok with the choke on but when its warm,it goes to stall then shoots back up to 0.9 then down again,then up. Does this until it stall's.
Any idea's or know where this valve is?
Thanks for your time
Mike
Having a problem getting my impreza to idle today,a mate of mine said try the idle control valve. Its ticks over ok with the choke on but when its warm,it goes to stall then shoots back up to 0.9 then down again,then up. Does this until it stall's.
Any idea's or know where this valve is?
Thanks for your time
Mike
#2
I had a simular prob on my sti 3, the valve was to the back right of the red inlet manifold when looking under the bonnet, i never adjusted mine but did remove the hole thing and blasted some carb cleaner through it.
That sorted my little problem and now runs fine, i hope this is some help but im sure someone else will have plenty more advice.
That sorted my little problem and now runs fine, i hope this is some help but im sure someone else will have plenty more advice.
#4
Scooby Regular
iTrader: (1)
Join Date: Jun 2002
Location: Crowbuckshire
Posts: 1,649
Likes: 0
Received 0 Likes
on
0 Posts
As you look at the engine it is mounted on the rear of the right hand side of the inlet manifold.
Remove it and clean it up.
Mine used to idle high,it would drop to normal level if you tapped top of valve with something. Was fine once cleaned.
Remove it and clean it up.
Mine used to idle high,it would drop to normal level if you tapped top of valve with something. Was fine once cleaned.
#6
Scooby Regular
Thread Starter
Join Date: Feb 2008
Location: put my v8 landrover aside lets play with the scooby
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Nice one,found it do i unscrew the 2 screws off the top,and spray carb cleaner in yeah?
Thanks for all the reply's,much appreciated
Thanks for all the reply's,much appreciated
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Feb 2008
Location: put my v8 landrover aside lets play with the scooby
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Yeah you know.
I unscrewed the 2 screws on the top,there was like a circle magnet in there dont think that was it. Theres 2 bolts at the back of it,think thats how to get in there. But mines a mare to get in there with a spanner or socket.
We need some help here guys
I unscrewed the 2 screws on the top,there was like a circle magnet in there dont think that was it. Theres 2 bolts at the back of it,think thats how to get in there. But mines a mare to get in there with a spanner or socket.
We need some help here guys
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
supshon
General Technical
2
03 October 2015 08:06 PM