de cat pipe
#3
Scooby Newbie
Thread Starter
Join Date: Dec 2008
Location: manchester
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
cheers i will be fitting very soon in that case any idea how much power i will gain i,m running at about 280 300 bhp on a z4 ecu sti turbo 1.1 bar
#6
Scooby Regular
Join Date: Dec 2007
Location: Nottingham
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Im running a my99 stock uk with an ae801, mbc to 1.1bar(td04) and japspeed decat dp and a walbro pump with no setup and all is well in my world.
Power no idea lol above 250 im sure.
Power no idea lol above 250 im sure.
#8
Scooby Newbie
Thread Starter
Join Date: Dec 2008
Location: manchester
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
i was told the full spec was 300 bhp with a z4 ecu off the sti td05 turbo running 1.1 bar this is my first scooby so everything is new to me need all the info i can get mate cheers
#10
Scooby Regular
iTrader: (13)
So, as long as the Z4 hasn't been chipped like myblackwrx has pointed out, you should be producing around 260bhp. If it does have a chip then, yes, it will be running 1.0-1.1bar and this will allow anywhere between about 270-290bhp.
Easy to check: remove ECU from passenger footwell... remove the ECU's casing and check the bottom right position as illustrated in myblackwrx's posted photo... you'd be looking for a rectangular raised black chip there, the same size as the space it sits in...
Last edited by joz8968; 29 December 2008 at 03:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM