MAHLE OR WISECO??????
#1
Scooby Regular
Thread Starter
iTrader: (13)
Join Date: Jul 2008
Posts: 1,748
Likes: 0
Received 0 Likes
on
0 Posts
MAHLE OR WISECO??????
as title guys comments on both and what you guys prefer
was told that wiseco can knock loudly when cold and expand when hot and was told by local specialist i'd need to make sure the bore had 3 tho clearance for when the piston expands.
but never heard anything about mahle pistons.
help advice plz
was told that wiseco can knock loudly when cold and expand when hot and was told by local specialist i'd need to make sure the bore had 3 tho clearance for when the piston expands.
but never heard anything about mahle pistons.
help advice plz
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
99% of after market and lots of OE knock when cold.. not a problem..
both very good.. prefer weisco but only by a nats wossits.. it is always worth checking the clearances..
I think weisco only do one grade where as mahle do differing.. I could remember it wrong but make sure you are getting the better mahle not the cheaper budget ones if you go mahle..
Simon
both very good.. prefer weisco but only by a nats wossits.. it is always worth checking the clearances..
I think weisco only do one grade where as mahle do differing.. I could remember it wrong but make sure you are getting the better mahle not the cheaper budget ones if you go mahle..
Simon
Thread
Thread Starter
Forum
Replies
Last Post