what pressure
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
what pressure
Hi going to fit a FX fuel pressure regulator this weekend to a 04 Sti, will be connectd to a defi, anybody tell me what pressure i should set it to. and any tips on fitting.
Thanks,
Rob.
Thanks,
Rob.
#4
Scooby Regular
iTrader: (15)
Join Date: Jul 2001
Location: Portsmouth
Posts: 8,606
Likes: 0
Received 0 Likes
on
0 Posts
it constantly fluctuates.
You set the fuel pressure at atmospheric pressure, with the manifold vac line disconnected.
Then when you reconnect the vac line it will miraculously drop about half a bar straight away depending on the turbo.
The as pressure increases so does fuel pressure.
Hence why at reasonable boost levels people suggest NOT fitting the sytec/FSE units but SX
You set the fuel pressure at atmospheric pressure, with the manifold vac line disconnected.
Then when you reconnect the vac line it will miraculously drop about half a bar straight away depending on the turbo.
The as pressure increases so does fuel pressure.
Hence why at reasonable boost levels people suggest NOT fitting the sytec/FSE units but SX
#6
Scooby Regular
Join Date: Apr 2005
Location: Brentwood
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
[quote=Peanuts;8086303]it constantly fluctuates.
You set the fuel pressure at atmospheric pressure, with the manifold vac line disconnected.
...setting the fpr at 1 atm is a bit low mate, - oe fpr is set to 3bar.
You set the fuel pressure at atmospheric pressure, with the manifold vac line disconnected.
...setting the fpr at 1 atm is a bit low mate, - oe fpr is set to 3bar.
Thread
Thread Starter
Forum
Replies
Last Post
matt12
ScoobyNet General
59
08 November 2015 09:15 PM
Reshard1977
General Technical
9
18 September 2015 08:58 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM