misfire between 1,500 and 2,500rpm
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 733
Likes: 0
Received 0 Likes
on
0 Posts
misfire between 1,500 and 2,500rpm
hi,
i have a my95 v2 sti. Its running about 300-330bhp with the usual stage 1 mods. I get a misfire between 1,500 and 2,500rpm. If i hold the accelerator between the two you can hear 'popping' in the exhaust. it happens when its cold and hot. I bought a second hand coil pack and swaped it over each cylinder one at a time, started it to see if it stopped 'popping' but had no luck. im not sure weather to spend alot of money buying new coil packs incase is not the problem. Also ive had it mapped to 1.1 bar. would the mapping cause the misfire? please help cheers
i have a my95 v2 sti. Its running about 300-330bhp with the usual stage 1 mods. I get a misfire between 1,500 and 2,500rpm. If i hold the accelerator between the two you can hear 'popping' in the exhaust. it happens when its cold and hot. I bought a second hand coil pack and swaped it over each cylinder one at a time, started it to see if it stopped 'popping' but had no luck. im not sure weather to spend alot of money buying new coil packs incase is not the problem. Also ive had it mapped to 1.1 bar. would the mapping cause the misfire? please help cheers
#2
Scooby Regular
Join Date: Oct 2003
Location: East Yorkshire
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Might be Lambda sensor as your description sounds like a fueling problem. Also if you had it mapped recently it might be worth having a word with your mapper.
Thread
Thread Starter
Forum
Replies
Last Post