TD05H TURBO QUESTION ???
TD05H TURBO QUESTION ???
15 August 2008, 07:09 PM
#2
Scooby Regular
Well conveniently enough I have a front entry converted TD05H-16G right here and it measures 49.2mm OD on the compressor outlet (feeding the intercooler). It has a slightly larger flange right round the end to hold a pipe on, so a 50/51mm hose would work. If you're interested, the compressor inlet (from air filter) is 60.7mm.
15 August 2008, 08:33 PM
#3
Well conveniently enough I have a front entry converted TD05H-16G right here and it measures 49.2mm OD on the compressor outlet (feeding the intercooler). It has a slightly larger flange right round the end to hold a pipe on, so a 50/51mm hose would work. If you're interested, the compressor inlet (from air filter) is 60.7mm.
That's really helpful. As I thought, a hose with an ID of 50/51mm would be required.
Also the info about the front entry air inlet OD is very helpful... Just in case I get a front-entry turbo after my OEM top-entry eventually lets go. The info lets me know which ID diameter 90-deg bend hose to get, so as to be able to mate up with the post-filter, 2nd resonator's downturned 90-deg pipe...
Many thanks SR!
Last edited by joz8968; 15 August 2008 at 08:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
blockhead
Subaru Parts
19
07 November 2015 11:50 PM