Noisey VF28
#1
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Noisey VF28
I have just fitted a decat downpipe and VF28 to my RB5 and the turbo has a strange wining sound to it.I have only started the car up and not driven it as i'm slightly dubious.
The turbo was bought from a reputable seller on here after he had fully refurbished it so I am not convinced the turbo is fooked just yet, although I'm sure the S/N community will soon change that.
I can only describe the sound as 'wining' and after I switched the engine off the noise continued for around 5 seconds then stopped.
Please tell me the turbo isn't knackered.
The turbo was bought from a reputable seller on here after he had fully refurbished it so I am not convinced the turbo is fooked just yet, although I'm sure the S/N community will soon change that.
I can only describe the sound as 'wining' and after I switched the engine off the noise continued for around 5 seconds then stopped.
Please tell me the turbo isn't knackered.
Trending Topics
#9
Scooby Regular
Join Date: Apr 2007
Location: East Sussex - www.polarperformance.co.uk
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Totally normal
it's a roller bearing turbo and the noise it the turbo winding down when you switch the engine off.
you may also notice a kettle boiling type noise as you bring boost in slowley in the higer gears (i.e 4th/5th), again totally normal and you get used to it or just bring the boost in harder
it's a roller bearing turbo and the noise it the turbo winding down when you switch the engine off.
you may also notice a kettle boiling type noise as you bring boost in slowley in the higer gears (i.e 4th/5th), again totally normal and you get used to it or just bring the boost in harder
#11
Scooby Regular
Thread Starter
iTrader: (46)
Join Date: Nov 2005
Location: Probably polishing it.Lol
Posts: 5,381
Likes: 0
Received 0 Likes
on
0 Posts
Thank god for that. MUFC
Thank god for that. My mate had a P1 and I can't remember his turbo sounding like that.
Anyway, if that's how it's supposed to sound, then so be it.
Thanks
Thank god for that. My mate had a P1 and I can't remember his turbo sounding like that.
Anyway, if that's how it's supposed to sound, then so be it.
Thanks
#12
Ive read this post via the search and Bobs original message is exactly the same as what I am experiencing. Everbody who replied and mentioned that this is how a VF28 soubds, mentions it on boost etc, but as Bob originally says and how I am experiencing is a noise imediately from startup and idle. The only way I can describe it is like a very loud fuel pump buzz/whine noise that moves with revs. IE if you start the engine from cold you can hear the turbo noise up to idle speed and it would noise away at idle, if you were to rev the car a little the turbo (fuel pump noise) would rise and fall with the revs. When the car is warm and you start going on boost the turbo sounds like any other with the forced air woosh, for me it was more the idle sound that I wondered about. Ive taken the inlet hose off and tried my best to check for play but it was hard to get a proper check because of the lack of space, there seemed to be very little to no play at all. When I tried to spin the compressor it maybe felt notchy but I couldnt say for sure. Any other VF28 owners confirm this?
Last edited by Plastikman; 08 April 2009 at 11:52 PM.
#13
Scooby Regular
iTrader: (1)
Join Date: Jul 2007
Location: Between a speed bump and a pot hole
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
My VF28 has done 100k and its not audible over the engine at idle, but as the above posters say you can hear it spooling down for a few seconds after switch off.
They are noisy turbos and meant to be more so with a de-cat, but don't think you should be able to hear it at idle...
They are noisy turbos and meant to be more so with a de-cat, but don't think you should be able to hear it at idle...
#19
I can hear mine.Its always sounded like that
Did you prime the central housing prior to fitting and initial start up ?
Mick
Mick
Last edited by Plastikman; 10 April 2009 at 07:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post