3inch exhaust system ???
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Herts
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
3inch exhaust system ???
Can i get some help here ??
I need a 3 inch bore pipework stainless exhaust sytem for my 01MY bugeye WRX but most of the systems i've looked at are 2.5inch , don't want an overly large tailpipe on it either 4 / 4.5inch's ,
Can anyone suggest a good one with a nice sound that isnt too loud , car currently has a Blitz Nur spec R on it but without the bung , don't like the sound with the bung in it but does make it quieter .
I might be getting old before my time lol but looking for something that stays within track / street regulations withouy sacrificing power ?
Any suggestions ??
cheers
I need a 3 inch bore pipework stainless exhaust sytem for my 01MY bugeye WRX but most of the systems i've looked at are 2.5inch , don't want an overly large tailpipe on it either 4 / 4.5inch's ,
Can anyone suggest a good one with a nice sound that isnt too loud , car currently has a Blitz Nur spec R on it but without the bung , don't like the sound with the bung in it but does make it quieter .
I might be getting old before my time lol but looking for something that stays within track / street regulations withouy sacrificing power ?
Any suggestions ??
cheers
#2
Scooby Regular
iTrader: (2)
Do you want a catalyst in the system?
3" sports cat system would be Milltek or Hayward & Scott
Full decat would include a Revolution (Jetex) system amongst others.
Both will need a remap to get the best out of them, the decat particularly as it offers very little back pressure and will allow overboosting.
Nick
3" sports cat system would be Milltek or Hayward & Scott
Full decat would include a Revolution (Jetex) system amongst others.
Both will need a remap to get the best out of them, the decat particularly as it offers very little back pressure and will allow overboosting.
Nick
#3
Scooby Newbie
Join Date: Jan 2008
Location: sunbury on thames
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
pro drive
i have just bought a full miltek system with race cats bit loud though but as it happens i did remove my prodrive 3" with 1 x race cat and am willing to sell for few hundred quid its is perfect condition
#5
Scooby Regular
Join Date: Jan 2008
Location: the promised land
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
orite fellas seem as ur on the exaust subject could anyone tell me if a 3"stainless uppipe of an 03, will go on my 00 clasic wagon cheers,and are u selling ur nur spec.
#6
Scooby Regular
iTrader: (4)
Join Date: Feb 2006
Location: Whats it Called?
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
check out the Vortex Afterburner R 3" system from scoobyworld, the off the shelf one norrows to 2.5" at the Cat, however if you ask for a full 3" system they will sort you out. Good quality stuff made by Hayward & Scott.
You can either go with a sports cat or be brave and go for the full decat like me.
You can either go with a sports cat or be brave and go for the full decat like me.
Trending Topics
#8
Twatful
Join Date: Apr 2003
Location: Grew up and don't drive Scoobs anymore!
Posts: 9,050
Likes: 0
Received 0 Likes
on
0 Posts
#9
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2003
Location: Herts
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Had a bit of a dig around and a lot of people rate the Revolution system ,
Currently running a full de-cat system although not sure of which make of downpipe is fitted , might even go the whole hog and get the matching Revolution downpipe !! lol
So it looks like its gonna be a change to the new Revolution system and sell on the Blitz Nur spec R !
Cheers everyone ,
Currently running a full de-cat system although not sure of which make of downpipe is fitted , might even go the whole hog and get the matching Revolution downpipe !! lol
So it looks like its gonna be a change to the new Revolution system and sell on the Blitz Nur spec R !
Cheers everyone ,
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM