waste gate wrx
27 September 2007, 07:13 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: carrickfergus
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
waste gate wrx
hi could someone tell me how to adjust the waste gate
when i put my hand on it, its loose.
thanks for all your help
cheers
1995 ej20 wrx
when i put my hand on it, its loose.
thanks for all your help
cheers
1995 ej20 wrx
Last edited by ernieman; 27 September 2007 at 08:20 PM.
27 September 2007, 08:21 PM
#2
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
depends which turbo i think,recently fitted a td05 that was not adjustable but the td04 that came off had the end fitted to a thread with a locknut.
personally i would probably change it if it is freeplay as it could be the actuator is on its way out.
27 September 2007, 10:48 PM
#3
Scooby Regular
iTrader: (4)
Join Date: May 2005
Location: midlands......
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Adjusted my td05 so that the penny valve could only just spin on its seat..... thats obviously with the turbo off the car before fitting it,it was fairly sloppy to start with...... you sure yours has no adjustment tony?
28 September 2007, 08:21 AM
#4
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
yes mate just a solid bar,as with yours mine was lsloppy aswell,so i used the actuator off my td04 instead.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM