OcTag3n

iTrader: (4)

I've installed an AVCR as far as the power & ECU splicing wires go but have not plumbed in the solenoid or pressure sensor under the bonnet yet.

I noticed that the AVCR RPM reading isn't matching my true RPM reading. Avcr is 3000 RPM above what my dash RPM is.

Have I done something wrong or do I need the solenoid & pressure sensor connected for the AVCR to read RPM correctly?

Thanks for any help.

The rookie

iTrader: (1)

Is it 3000 rpm above, or double (which would happen with wasted spark versus plug top coils for example).

Simon

ZEN Performance

Have you set it to 4 cylinder in the "etc->car somethingorother" menu?

Paul

OcTag3n

iTrader: (4)

After just driving it I noticed that when my dash RPM is around 2-3k the AVCR RPM is maxed out at 8k only dropping down to just over 4k when I'm sat stationary at idle.

Not sure about the 4 cylinder setup but I will check as soon as I can.

OcTag3n

iTrader: (4)

What exactly does that mean?

Please elaborate.