bassman188

i have a fault code come up on my car and its code 33 vehicle speed sensor 2
anyone got any ideas what this and where it goes
cheers

bassman188

anyone

Lee D T

iTrader: (1)

You should find everything you need on the link below, worth saving too.

Chris Palmer's Home Page

bassman188

you my son are an absolute star

wilkoca

Vss 2 runs off your gearbox to either the speedo cable and then runs to your speedo or via an electric loom.

If its a cable it may have come loose if its an import it could be the derestrictor.

If its the electric variety the derestrictor chips can fail.

i bought a sh vvs for £20 from a breakers - but finally found the error to be a badly wired turbo timer.

bassman188

changed my ecu to an apexi one and the problem seems to have stopped???
must of been the ecu???

Jolly Green Monster

iTrader: (4)

Unlikely the Apexi just monitors the speed signal.. it doesn't use it.. unlike the original ecu with speed limiter on.
Therefore no problem on the Apexi.

Simon

bassman188

so is it going to cause me anymore problems with the apexi pfc or would it be wise to replace the speed sensor??

Jolly Green Monster

iTrader: (4)

it won't cause any problems no..

if you were to fit an Apexi AVC-R it might cause a problem with the gear judge set up if the speed sensor is not function correctly.

I assume your speed works fine?

Simon

bassman188

yes the speed is fine on the speedo but it wont show my actuall speed on the fcc
do you know where the speed sensor is located?? what it looks like etc??
where would i get one without going to the main stealer??
i tried the sight listed above but the pic wasn`t very helpfull

wilkoca

as i said in my original post

vss is on the gearbox if you look to the right of the downpipe on the gearbox you will see it - i also have 2 spare

is it a manual drive or electronic

Jolly Green Monster

iTrader: (4)

what he said..