Will these fit a 99/00 Phase 2 fuel rail????
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Jun 2005
Location: South Wales, Scoobless, Type R is gone!
Posts: 3,618
Likes: 0
Received 0 Likes
on
0 Posts
Will these fit a 99/00 Phase 2 fuel rail????
Bought these Venom Performance Injectors from the US, was told they would fit a 99/00 WRX but they look slightly different to the Apexi ones pictured on flat4online.
Am i being paranoid?? or are they the wrong fitment:
Apexi ones:
Apexi 550cc Injectors Subaru Impreza 99-00 Flat4online.co.uk Subaru Impreza Mitsubishi Evolution EVO Walbro Fuel Pumps Injectors Intercoolers
The over all size / plug design / postion of the "o" rings look the same, but the proportions of the bit that go in the fuel rail look a little different.
Am i being paranoid?? or are they the wrong fitment:
Apexi ones:
Apexi 550cc Injectors Subaru Impreza 99-00 Flat4online.co.uk Subaru Impreza Mitsubishi Evolution EVO Walbro Fuel Pumps Injectors Intercoolers
The over all size / plug design / postion of the "o" rings look the same, but the proportions of the bit that go in the fuel rail look a little different.
#4
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
not had good experiances with Venom injectors.. they seemed to dribble fuel out a bit like venom from a snake.. lol
but that was the old pintle design phase 1 fitment... they however look like phase 2 fitment.
Simon
but that was the old pintle design phase 1 fitment... they however look like phase 2 fitment.
Simon
#6
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Jun 2005
Location: South Wales, Scoobless, Type R is gone!
Posts: 3,618
Likes: 0
Received 0 Likes
on
0 Posts
If so there are 4 holes in the end of the ones i have.
That doesn't sound good.
Last edited by turboDean; 30 March 2007 at 07:11 PM.
#7
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Jun 2005
Location: South Wales, Scoobless, Type R is gone!
Posts: 3,618
Likes: 0
Received 0 Likes
on
0 Posts
The thing that concerns me is the distance between the Large (top) O ring and the mesh bit, it look's a lot bigger on the apexi/nismo ones.
Gonna get them fit next week and see if they fit, probably take them back off then til the day before it's mapped.
Gonna get them fit next week and see if they fit, probably take them back off then til the day before it's mapped.
Trending Topics
#8
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
As long as the O rings are the correct diameter and the same distance apart as the originals, what goes on with the strainer etc doesn't really matter as it just sits in the fuel rail chamber.
If they are multi spray then there is hope !
If they are multi spray then there is hope !
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
BHPvstorque
Subaru Parts
1
13 September 2015 06:42 PM