Notices

LOSS OF BOOST ????????????????

Thread Tools
 
Search this Thread
 
Old 27 January 2007, 09:11 PM
  #1  
SNAP-ON
Scooby Regular
Thread Starter
iTrader: (1)
 
SNAP-ON's Avatar
 
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default LOSS OF BOOST ????????????????

My 94uk wagon has lost some boost , gone from 14psi down to 10psi max ! all vacumn pipes are now silicon still using the restrictor , the plugs are new and gapped to 0.7 done them today (did have 6s now fitted 7s) , all coils are perfect with no cracks , cleaned maf , cleaned solenoid , checked for split induction pipes as i have an hks induction kit fitted , done a code check and nothing ! done all of the above today and no different ! also have chipped ecu . i have a dawes device fitted so can rule out faulty boost solenoid ! have checked the tiny pin hole is clear in the dawes which it is ! also had an arc dump valve fitted and put standard recirc on and made no difference either ! whats left ??? the actuator ????????? you can feel the car not pulling as hard . tried winding the dawes up a bit for more boost and made a small difference (1 psi !) anyone???????????????????????????
Old 27 January 2007, 09:39 PM
  #2  
Lee D T
Scooby Regular
iTrader: (1)
 
Lee D T's Avatar
 
Join Date: Apr 2004
Posts: 1,910
Likes: 0
Received 0 Likes on 0 Posts
Default

Maybe a leak from the turbo to intercooler - intercooler to throttle body?

Originally Posted by SNAP-ON
My 94uk wagon has lost some boost , gone from 14psi down to 10psi max ! all vacumn pipes are now silicon still using the restrictor , the plugs are new and gapped to 0.7 done them today (did have 6s now fitted 7s) , all coils are perfect with no cracks , cleaned maf , cleaned solenoid , checked for split induction pipes as i have an hks induction kit fitted , done a code check and nothing ! done all of the above today and no different ! also have chipped ecu . i have a dawes device fitted so can rule out faulty boost solenoid ! have checked the tiny pin hole is clear in the dawes which it is ! also had an arc dump valve fitted and put standard recirc on and made no difference either ! whats left ??? the actuator ????????? you can feel the car not pulling as hard . tried winding the dawes up a bit for more boost and made a small difference (1 psi !) anyone???????????????????????????
Old 27 January 2007, 11:34 PM
  #3  
SNAP-ON
Scooby Regular
Thread Starter
iTrader: (1)
 
SNAP-ON's Avatar
 
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

bttt
Old 28 January 2007, 09:30 AM
  #4  
dan83590
Scooby Regular
 
dan83590's Avatar
 
Join Date: Aug 2006
Posts: 3,214
Likes: 0
Received 0 Likes on 0 Posts
Default

Just wondering. Did the problem start when you fitted the silicone pipe and restrictor to the bottom of the boost control solenoid?
Old 29 January 2007, 08:58 PM
  #5  
SNAP-ON
Scooby Regular
Thread Starter
iTrader: (1)
 
SNAP-ON's Avatar
 
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

problem was before that ! also the tick over has gone from 75o to 1000 rpm but its been like that for a couple of months now , not sure if thats linked to anything ?? could it be my maf ? or actuator faulty ? want my 14psi back !
Old 29 January 2007, 09:22 PM
  #6  
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Jolly Green Monster's Avatar
 
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes on 2 Posts
Default

either you have a boost leak.. ie. pipe between intercooller and throttle body, or a vac line is split loose connection, are they all clamped?..

If it was running 14psi on the dawes and now running less then you might need to adjust it as the spring may have weakened.. but you need to ensure there is no leaks first etc..

Simon
Old 29 January 2007, 09:24 PM
  #7  
sarnyboy
Scooby Regular
 
sarnyboy's Avatar
 
Join Date: Dec 2006
Location: milton keynes
Posts: 1,243
Likes: 0
Received 0 Likes on 0 Posts
Default

my 93 wrx recently did the same thing

after 3 months of troubles, finally cured it

i gapped the spark plugs from 0.7 down to 0.6, boost s fine now

someone suggested this is signs of my coil packs going down hill

spark plug gaps definately worth a try mate

Old 29 January 2007, 09:49 PM
  #8  
SNAP-ON
Scooby Regular
Thread Starter
iTrader: (1)
 
SNAP-ON's Avatar
 
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

cheers jgm was hoping to get answer from you ! will check intercooler piping etc , all pipes are clamped , also the hks induction kit seems to be making loads more sucking/hissing noise even at low boost coming of throttle it dumps so loud , even with standard valve !
Old 29 January 2007, 10:30 PM
  #9  
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Jolly Green Monster's Avatar
 
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes on 2 Posts
Default

what sarnyboy says is also worth looking into but you would normally feel a hessitation.. I am assuming it boosts like normal just lower number?

Simon
Old 29 January 2007, 10:34 PM
  #10  
SNAP-ON
Scooby Regular
Thread Starter
iTrader: (1)
 
SNAP-ON's Avatar
 
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

yeh boost is fine/normal just lack of high boost . did have 6s before with 0.6 gap and changed to 7s on saturday with 0.7 gap must smoother revs now but the 6s were well used ! will check dawes spring aswell
Old 29 January 2007, 10:42 PM
  #11  
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Jolly Green Monster's Avatar
 
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by SNAP-ON
yeh boost is fine/normal just lack of high boost . did have 6s before with 0.6 gap and changed to 7s on saturday with 0.7 gap must smoother revs now but the 6s were well used ! will check dawes spring aswell
you might need to go smaller on the 7s..

Simon
Old 30 January 2007, 03:50 PM
  #12  
sarnyboy
Scooby Regular
 
sarnyboy's Avatar
 
Join Date: Dec 2006
Location: milton keynes
Posts: 1,243
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah, i gapped my 7's to 0.6...
Old 30 January 2007, 08:54 PM
  #13  
SNAP-ON
Scooby Regular
Thread Starter
iTrader: (1)
 
SNAP-ON's Avatar
 
Join Date: Jun 2006
Location: sussex
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorted !! done what jgm said and undid the dawes and extended the spring inside , put it back together and 14psi !!!!!!!! as he said the spring may of become weak which it must have , but now sorted , cheers people
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
psport
Subaru Parts
3
04 October 2015 07:35 PM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
mistermexican
General Technical
2
01 October 2015 04:30 PM
InTurbo
ScoobyNet General
21
30 September 2015 08:59 PM
tjapplejuice
Drivetrain
9
25 September 2015 03:46 PM



Quick Reply: LOSS OF BOOST ????????????????



All times are GMT +1. The time now is 02:31 PM.