3 port boost solenoid
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: From Outback 2 classic wagon 2 newage wagon 2 Legy TT 2 classic 2 newage STi
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
3 port boost solenoid
Where can I get one and how much do they cost???
cheers
cheers
#4
You can get a Perrin one for roughly £80.
I should imagine it's up to the job too.
car accessories with Amber Performance: car parts and accessories - electronic car tuning, braking products, engine tuning, auto parts for ford, bmw, honda, toyota and classic cars
I should imagine it's up to the job too.
car accessories with Amber Performance: car parts and accessories - electronic car tuning, braking products, engine tuning, auto parts for ford, bmw, honda, toyota and classic cars
#6
The Perrin ones are good and come with fitting kit, hoses, clips and install instructions. They can be fitted in 2 port mode as factory using the factory piping or interupt mode using all 3 ports but you will need to have your wastegate maps adjusted if you fit it this way or your boost levels will change. I am working on the basis your car has a 2 port solenoid now. If it already has a 3 port then no point changing it.
Trending Topics
#10
Scooby Regular
Join Date: Jun 2006
Location: Norwich
Posts: 1,526
Likes: 0
Received 0 Likes
on
0 Posts
Pressure from the inlet manifold or compressor outlet goes from their to the actuator.
In between theres a valve,bleed some of the air of from reaching the actuator and the boost level before the wastegate opens,rises.
Three port has three points on it,first from the compressor outlet or inlet manifold (not sure which on the Impreza)2second from the solenoid to the actuator.Thirdly,a bleed.
HTH,Dan.
#11
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
Pressure from the inlet manifold or compressor outlet goes from their to the actuator.
In between theres a valve,bleed some of the air of from reaching the actuator and the boost level before the wastegate opens,rises.
Three port has three points on it,first from the compressor outlet or inlet manifold (not sure which on the Impreza)2second from the solenoid to the actuator.Thirdly,a bleed.
HTH,Dan.
#14
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM