removing apexi avc-r
#1
removing apexi avc-r
i want to remove my avc-r from my impreza but not sure where the two rubber pipes refit to. one runs from the actuator to the apexi solenoid, the other one comes from the turbo itself to the new soleniod. these are the two that i am sure of where they should go when the apexi soleniod is removed. can anyone enlighten me or even better got some photos that could be emailed to me. thanks for looking.
p.s. once removed it would be up for grabs if anyone interested!
p.s. once removed it would be up for grabs if anyone interested!
Trending Topics
#8
can anyone please help me with this. just need to know where the two pipes refit onto the standard boost solenoid once the apexi solenoid is removed. the one from the actuator and the one from the turbo housing. thankyou.
#9
Scooby Regular
Join Date: Sep 2005
Location: Winterton
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Right mate,
Since it is a MY99, you car should have a 2 port solenoid as std.
So here it is:
a)need to t off the pipe for me compresso to the actuator
b) connect the pipe to the intake of you solenoid
c)connect the output of the solenoid back to the intake.
Job done!!!
Hope this helps.
Charles
Since it is a MY99, you car should have a 2 port solenoid as std.
So here it is:
a)need to t off the pipe for me compresso to the actuator
b) connect the pipe to the intake of you solenoid
c)connect the output of the solenoid back to the intake.
Job done!!!
Hope this helps.
Charles
Thread
Thread Starter
Forum
Replies
Last Post