Fitting Dawes Device to 95 RA import
#4
It's the solenoid on the driver's side suspension turret..... Can't miss it, it has 3 tubes going into it and an electrical (2pin) connection.
edit: looks like half a smartie tube, vertically mounted...
edit: looks like half a smartie tube, vertically mounted...
#6
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
You don't really need to know about the BCS pipework, just look for the turbo nipple and wastegate actuator. The Dawes goes between these two, the pipes that you have to remove should be blocked off (or joined together if you wish). Job done!
#7
Scooby Regular
Thread Starter
Join Date: Aug 2006
Location: Glasgow
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
After having a look tonight, theres 3 tubes that run to the suspension turret. I can see one pipe comes off the actuator and looks like the thickest of the 3. Is it this pipe that the Dawes is put into? Also, which end of the DD is the In side?
Kris
Kris
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Aug 2006
Location: Glasgow
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Where abouts on the turbo will I find the nipple in question as I can't see one (presuming it looks similar to a bleed nipple on a brake calliper?)
Any pics would really help!
Kris
Any pics would really help!
Kris
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM