scoobypeterpump

Hi
I Have Just Bought 4 Pots From A 99 Classic Will These
Fit Straight Onto My 96 Wrx?
Pump

kalv

yep.. go straight on.. did the same for my 96 classic.. i got the stainless steel hoses aswell.. much better..

scoobypeterpump

Thanx Mate
Where Did You Get Hold Of Stainless Steel Pipes And
How Much Do They Cost?
Pump

kalv

Got them from GGR
http://www.grahamgoode.com/subaru/pa...group=48&nav=1
and cost £70 something including the dot 5.1 brake fluid.

scoobypeterpump

Thanx Mate

stockcar

be aware that you will need wheels that clear the calipers................not all the early styles do

alyn

jameswrx

iTrader: (4)

as alyn said, remeber the wheels.

kalv

yes, forgot to mention the wheels.. got P1 17" on mine and all clear.

Petrolhead35

Should have no problems with 16s as i have a set of raceline 16s of a rally car and although close clear the 4 pot calipers no probs.

scoobypeterpump

Thanx Guys
I Should Be Ok As I Have 17'' Prodrive Gold Wheels.
Pump

stockcar

was speasking specifically about the early styles of SUBARU 16" wheels that do not have the spoke clearance to clear the later 4pot calipers............we use 15" gravel wheels on the gpN cars that clear but they have a specific design to enable it..............

cheers, alyn

pugsleygti

hi sorry to jump in on your chat but i've got a 95wrx and not happy with the brakes even tough i put ebc discs and pads on is it worth while getting the later model 4 pots then how much will these cost or am i better saving for a an aftermarket set thanx for any help chris

Petrolhead35

Hi mine were off an MY02 and they cost me 250 off ebay for disks calipers and pads. Oh postage was an additional 30.

kalv

i paid around the same on Ebay... theres some going on http://www.gradea-subaru.co.uk/3.html

Roojai

Grade A is good service but a little expensive. If you need something in a hurry, and don't mind paying a bit more its worth it though