Did you use these to get readings for your Defi guages?
17 July 2005, 07:14 PM
#1
Scooby Regular
Thread Starter
Did you use these to get readings for your Defi guages?
Just need to confirm the Defi *kit* senders can be used with the following sender locations and if the suitable threaded sender is inc... if not need to know what one I need.. if anyone out there could help specifically the Defi senders.. 
Ok to get Oil temp from this location? (see pic)
http://www.stefanostadal.homedns.org...ge/step3_d.jpg
Ok to get Oil preasure from this location? (see pic)
http://www.stefanostadal.homedns.org...ge/step3_i.jpg
Pics borrowed from http://www.stefanostadal.homedns.org...ods_gauges.htm
Ok to get Oil temp from this location? (see pic)
http://www.stefanostadal.homedns.org...ge/step3_d.jpg
Ok to get Oil preasure from this location? (see pic)
http://www.stefanostadal.homedns.org...ge/step3_i.jpg
Pics borrowed from http://www.stefanostadal.homedns.org...ods_gauges.htm
18 July 2005, 12:10 AM
#2
They're the places my Defis are fitted to and all the info is on that site.
You'll need a bush to fit the temp sensor. Try here:
http://www.lma-group.com/motorsport/...ing_parts.html
You'll need a bush to fit the temp sensor. Try here:
http://www.lma-group.com/motorsport/...ing_parts.html
18 July 2005, 04:57 PM
#3
Scooby Regular
Thread Starter
Originally Posted by Houghton
They're the places my Defis are fitted to and all the info is on that site.
You'll need a bush to fit the temp sensor. Try here:
http://www.lma-group.com/motorsport/...ing_parts.html
You'll need a bush to fit the temp sensor. Try here:
http://www.lma-group.com/motorsport/...ing_parts.html
Thinking about Fuel preasure & EGT. We shall see.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM