Diagnostic port output signal/select monitor software?
13 June 2005, 03:44 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2004
Location: Isle of Man
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Diagnostic port output signal/select monitor software?
Does anyone know if there is software downloadable or something to emulate what the select monitor reads and interprets from the diagnostic port in a classic or a legacy?
It must be something pretty basic as there are only two connections on the ecu for the select monitor signal. I'd like to be able to make up a serial cable to connect to the diagnostic port and study the output on my laptop but no idea what software (preferably free!!) might be able to do this and what connections I'd need to make at a serial port on the pc.
Any ideas would be great, cheers!
It must be something pretty basic as there are only two connections on the ecu for the select monitor signal. I'd like to be able to make up a serial cable to connect to the diagnostic port and study the output on my laptop but no idea what software (preferably free!!) might be able to do this and what connections I'd need to make at a serial port on the pc.
Any ideas would be great, cheers!
13 June 2005, 05:09 PM
#2
Scooby Regular
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
hardcoreimpreza
Computer & Technology Related
21
11 October 2015 03:40 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
