Max power from garrett gt 35 p18 turbo?
07 February 2005, 08:19 PM
#2
Scooby Regular
Join Date: Sep 2001
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Native GT35 compressor map
http://www.atpturbo.com/root/maps/gt35.htm
which looks like it could support c. 500 bhp if you believe the flow capacities
http://www.atpturbo.com/root/turboin...p/gtlineup.htm
Depends on how much the P18 turbine limits the GT35 compressor, and how much you allow for American bhp
http://www.atpturbo.com/root/maps/gt35.htm
which looks like it could support c. 500 bhp if you believe the flow capacities
http://www.atpturbo.com/root/turboin...p/gtlineup.htm
Depends on how much the P18 turbine limits the GT35 compressor, and how much you allow for American bhp
Last edited by madou; 07 February 2005 at 08:26 PM.
07 February 2005, 08:45 PM
#3
Scooby Regular
Join Date: Jan 2005
Location: 01274 881106 www.theRacingline.co.uk West Yorkshire
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
P18 exhaust housing is from a IHI turbo not Garrett. Are you sure its a full GT35 or is it an IHI hybrid turbo with Garrett core and P18 exhaust housing?
08 February 2005, 06:25 PM
#4
Scooby Regular
Thread Starter
Join Date: Dec 2004
Location: RCM 550bhp P1
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
It is a Hybrid I am having it fitted at RCM they say at 1.8 bar it will be around 400bhp just wondered what the maximum power is from the turbo
marty
marty
09 February 2005, 09:41 AM
#5
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I doubt its a gt35 compressor..
if thats at 1.8 bar I suspect your around the limit for the turbo. maybe 420 -450 depending on fuel, but I doubt it.
if thats at 1.8 bar I suspect your around the limit for the turbo. maybe 420 -450 depending on fuel, but I doubt it.
09 February 2005, 10:10 AM
#6
It could be a GT35 non-R compressor. which is the same as used in some GT30R turbos, I think it's the 52 trim 76.2mm exducer compressor wheel. If they have actually gone for the 56trim 82mm exducer compressor, they are mad IMHO!
The Turbine will be an 84 trim unit, probably the 2.36" one as used in the GT30.
I wouldn't like to put a power level on the turbo, but then I would expect good quality technical advice to come free from the supplier if you spend £1xxx on a turbo.
Paul
The Turbine will be an 84 trim unit, probably the 2.36" one as used in the GT30.
I wouldn't like to put a power level on the turbo, but then I would expect good quality technical advice to come free from the supplier if you spend £1xxx on a turbo.
Paul
09 February 2005, 08:30 PM
#7
Scooby Regular
Join Date: Sep 2002
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
I would say it's the smaller 71mm 52t GT35 compressor wheel, and if it is a garrett core, then I think the turbine will also be smaller, maybe a 56.5mm gt28.
The 76mm cw with the 60mm gt30 turbine is too big for those figures mentioned.
The 76mm cw with the 60mm gt30 turbine is too big for those figures mentioned.
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM
