Advice on induction sys please?
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2005
Location: N.Ireland
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Advice on induction sys please?
I have recently bought a 2001 bugeye WRX. I bought the car with an induction system fitted. I also have the OE airbox and afterreading some threads on here I am wondering should I put the OE airbox back in. The onlyother mods to the car are a ful decat. I cant afford a remap just at the minute. Any advice would be greatfully appreciated as I am new to this machine.
Cheers
John
Cheers
John
#6
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
Good for 350 but will be restricting a bit of power at that level I would have thought.
What system was it? The vast majority of them are crap, and the good filters are defeated by the fact they draw warm air. Only good one is a K&N style with a heat shield on it, cold feed and a remap. APS style inner wing one is an ok design, but fatal if not remapped from what ive researched.
MB
What system was it? The vast majority of them are crap, and the good filters are defeated by the fact they draw warm air. Only good one is a K&N style with a heat shield on it, cold feed and a remap. APS style inner wing one is an ok design, but fatal if not remapped from what ive researched.
MB
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM