SamUK

iTrader: (1)

Hi,

I am buying a APS FMIC, has anyone got any pics or instructions of how to fit?

A ready cut bumper is included...So mainly need to know of where to take the bumper off and run the pipes etc....

I have noticed a big thread on the HYBRID FMIC, which i am reading through, but not sure if the APS fittigns will be the same..

Thanks for the help in advance.

Tone Loc

iTrader: (1)

The previous owner may have the fitting instruction still.... follow those.

Tony.

Aztec Performance Ltd

iTrader: (234)

Probably easiest to get the chap to fit it for you. You got a bargain there.

Bob

Aztec Performance Ltd

iTrader: (234)

Mind you it prolly not that hard to DIY. I always find it easiest once the bits are in front of you.

stevebt

iTrader: (8)

well i hope your the one who put the £600 bid on ebay if its the one in the forsale section , as its sold

SamUK

iTrader: (1)

Guys thanks for all the input...

I will attempt to fit myself, though does seem not that difficult...

Ps: I know, its sold to me... not for £600 though...

gussy

iTrader: (2)

Sam,
If you go onto the aps web site they have the instructions on how to fit them there,I belive the one that was for sale on e-bay went to midlife.

gussy

iTrader: (2)

Just seen your post sam must have been another one for sale.

Midlife......

iTrader: (2)

Gussy

The recent e-bay APS FMIC was for a Classic £600........ somebody got a real bargain there

I got my APS FMIC for £750 but it arrived damaged form the seller........ still sorting the situation out but big thanks to the Cumbrianscoobs who swapped the STi TMIC in the pub car park !!!

I'm getting RCMS to fit mine

SamUK

iTrader: (1)

I actually agreed a price with the seller before the auction ended....and was going to collect Wednesday...but seems the auction ended...so the seller is talking to the winning bidder...as my offer was more to start with...

So i will find out tommrow...

Midlife......

iTrader: (2)

SamUK

The Advert on e-bay is basically an "offer to chaffer", so the seller can sell it to you without problem I hope you got it!!

Midlife.....

SamUK

iTrader: (1)

He could have...but apparantly the buyer who paid 100quid less lived down the road from him...Hmm....

Anyhow...thats a thing of the past...

I have ordered my ACVr apexi boost controller...and will be ordering the HYBIRD FMIC from Harvey....for allot less...and allot of Scooby owners are happi with the product....

Midlife......

iTrader: (2)

Yep

the hybrid FMIC has a lot of fans. Harvey ported my Headers and did a top quality job....... No problems

Midlife.....

SamUK

iTrader: (1)

Someone has offered me a HKS FMIC...so am deciding between Harvey's and that at the moment...

HKS FMIC KIT @ £480 Delivered (Used)
HYBIRD FMIC KIT £580 Delivered (New)

Am waiting on close up pictures of the HKS, as 1 line has a 2cm minor dent, though been told its not noticeable....Apart from that the fins are perfect...

Is there anything else i should be looking out for in th HKS apart from the Fins?

harvey

iTrader: (48)

The cores are softer and therefore more prone to damage than both the Hybrid and APS. If you fit the HKS then put on a protective mesh which will effect efficiency, marginally.

P20SPD

iTrader: (1)

Agree with Harvey on the mesh, if i havent already told you by email Sam. The APS must be the toughest out there.

SamUK

iTrader: (1)

Okay....so the APS is now out of the question...

HKS for £480 or HYbird for £580?

Harvey, no offence, but i just wana check between the 2, as the price on the HKS is little cheeper...though im sure i will get allot more usefull help from yourself and others on the Hybird....as most people have them and there is a installation thread on it...

Help......

P20SPD

iTrader: (1)

HKS is long term proven, and for £480 + £20 for some mesh, i would go with the HKS over the Hybrid. Its a doddle to install.

scoobytastic

ive just noticed this thread while looking for fitting instructions for the aps fmic you are all talking about, as i bought it after the auction had ended. i sent him an email and he rang me back and made a deal(must have been looking for the highest bidder) sorry if he had made a deal with anyone,as i didnt know.

Martin

SamUK

iTrader: (1)

Martin

Well...I made a deal with him just before the auction end...again on the phone aswell as well as via email!

Then his story was:

The guy won the auction lives down his road, and he does not want any trouble from him (how convinient)...which ofcourse i knew was a pile of Cack....but he should not have agreed a price with me!! I cancelled my orders so that i could go collect that...

THE GUY WAS A COMPLETE WASTE OF TIME!

PS: I must have spent a good hour on the phone to him aswell, wasted my time and my BILL! Deal was done and i was to collect the next day from him.