Help....
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: South West
Posts: 1,461
Likes: 0
Received 0 Likes
on
0 Posts
Help....
I have given the boost control solenoid a clean - but cannot recall which pipes connect to the 2 solenoid pipes ??
All I need to know is - is it the upper or lower pipe on the boost control solenoid (it being fixed to the strut) which connects to the wastegate ? I currently have both pipe from the solenoid disconnected and need to know which one connects to the wastegate ?
It is all disconnected at the moment and I am not going to drive it until I know for sure which one goes where. So I would be very grateful if someone with a MY00 or similar setup could kindly have a quick look at theirs and let me know.
Thanks in advance
All I need to know is - is it the upper or lower pipe on the boost control solenoid (it being fixed to the strut) which connects to the wastegate ? I currently have both pipe from the solenoid disconnected and need to know which one connects to the wastegate ?
It is all disconnected at the moment and I am not going to drive it until I know for sure which one goes where. So I would be very grateful if someone with a MY00 or similar setup could kindly have a quick look at theirs and let me know.
Thanks in advance
Last edited by NelsonUK; 26 February 2004 at 06:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ravimal3
General Technical
9
22 September 2015 06:44 AM