My00 windscreen wiper
#1
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Northants
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
My00 windscreen wiper
My nearside wiper has stopped working, well, not quite, it looks as if its come off the spline because it moves very slightly.
This happened when we had loads of snow and i turned my engine on i forgot my wipers were still on, so they attempted to shift a tonne of snow! lol
How do i get at the splines, i couldnt see from the quick look i had the other day?
This happened when we had loads of snow and i turned my engine on i forgot my wipers were still on, so they attempted to shift a tonne of snow! lol
How do i get at the splines, i couldnt see from the quick look i had the other day?
#2
there should be a rubber grommet on the arm at the bottom, take that off and there should be a nut either 12 or 13mm cant remember make sure that is tight. if you remove the nut the whole arm should pop off the spindle just give it a good wiggle and hope it hasn't chewed all the splines out the arm to much
#3
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Northants
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scoobyboy
there should be a rubber grommet on the arm at the bottom, take that off and there should be a nut either 12 or 13mm cant remember make sure that is tight. if you remove the nut the whole arm should pop off the spindle just give it a good wiggle and hope it hasn't chewed all the splines out the arm to much
Tightened the nut and all sorted.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM