MY96 - Walboro Fuel Pump
#1
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the part number for a 255 L/HR Walboro fuel pump for an MY96 UK Wagon ? I know the part number for the MY00 - MY03 is GSS342. Does the MY96 UK Wagon use the same pump as the MY00 - MY03's.
Thanx in advance
Thanx in advance
#4
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Did they come with a fitting kit part number 400-791?
It seems that there is 2 types available with the 255l/hr capacity namely GSS341 & GSS342.
Thanx again
It seems that there is 2 types available with the 255l/hr capacity namely GSS341 & GSS342.
Thanx again
#5
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
I asked Mark for a Walbro pump and FPR and he sent the fuel pump, and connector.. as the 96 car has the four bolt on connectors.. two on each terminal to the original pump and you need to cut them off and connect to the connector Mark sent with the pump as part of the kit.
Which must be the kit you refer too.. he also sent a bit of fuel hose as the original pump is taller and therefore has a shorter bit of hose.. I was able to just fit it straight in and only took about 30minutes as all the parts went straight on.
You might want to consider doing the FPR too?
Email or ring Mark details at www.lateralperformance.co.uk
Simon
Which must be the kit you refer too.. he also sent a bit of fuel hose as the original pump is taller and therefore has a shorter bit of hose.. I was able to just fit it straight in and only took about 30minutes as all the parts went straight on.
You might want to consider doing the FPR too?
Email or ring Mark details at www.lateralperformance.co.uk
Simon
#7
Dell the differance between the two is the position of the fuel outlet in relation to the inlet The GSS342 is inline (if you look at the pump side on you can draw a vertical line throught the inlet and outlet) and the GSS341 is opposite
I bought the GSS342 and for my 93WRX the best one would have been the GSS341 but it wasnt a problem as the fuel pipe on the car can be bent ever so slightly and it fits no problem. the fitting kit you mention is the correct one and fitted mine with no soldering etc
I bought mine from ebay http://cgi.ebay.com/ebaymotors/ws/eB...&category=6763have a look and see what I paid (the pic on this shows the GSS341 but the auction was for the GSS342)
Hope this helps Alistair
[Edited by AliG - 11/21/2003 2:11:32 PM]
I bought the GSS342 and for my 93WRX the best one would have been the GSS341 but it wasnt a problem as the fuel pipe on the car can be bent ever so slightly and it fits no problem. the fitting kit you mention is the correct one and fitted mine with no soldering etc
I bought mine from ebay http://cgi.ebay.com/ebaymotors/ws/eB...&category=6763have a look and see what I paid (the pic on this shows the GSS341 but the auction was for the GSS342)
Hope this helps Alistair
[Edited by AliG - 11/21/2003 2:11:32 PM]
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Cheers AliG It seems like we are thinking on the same lines That's the reason I was asking as I found them the other day when somebody else pointed me in that direction.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM