Dyney

3 yellow connectors sounds like a MY97/98

As for confermation from the codes (Sorry)

AndrewC

This sounds a bit mixed up, the 3 yellow connection ECU does indeed sound like a 97/98 ECU but the Series McRae were MY96s which have the earlier ECU.

Can you get a photo, have you had the lid off the ECU to check what's inside?

Andrew...

Pavlo

I think it is for a 96 car, where does it mention 3 connectors?

AndrewC

Paul,

The original post doesn't the second one does, I got confused as I seem to more and more these days!

Andrew...

GBruce

Andrew,

It also had something like "Unleaded 98 Ron only" on the sticker and it was sealed with one of them silver tamperproof label things

I was also thinking it's for a my96 Series Mcrae but i'm sure i have seen an my97 Series Mcrae. I don't want to waste the money buying it and it not fit my car which is an my98 UK

Would it do any harm to my car if I just tried to plug it in? at least i'd know then if it would physically fit.

Cheers

George

AndrewC

Well if it's for a 96 the connectors are different, 4 plugs instead of 3 for 97/98 ECU.

Andrew...

GBruce

Hi,

The ECU has 4 connectors, so it must be for an older car, Just have to keep looking I suppose, thanks to everyone who replied

George

GBruce

Hi,

Been to look at an ECU and was wondering what car it is for? it has the following markings...

ECU No. RP33
Rom 27544
A P Plate Registration Number
Series McRae No. (Blank)

It has a big Prodrive sticker on the case which has the above on it, and a blue label on the yellow connectors which reads 000 D08

Hopefully this is a Prodrive ECU for an MY97/98 UK car, any help would be appreciated,

Thanks


George



[Edited by GBruce - 2/9/2003 9:31:57 PM]

Chris.Palmer

I've got a MY96 with Prodrive PPP ECU.

The Rom is labeled 27544 - this should would work with phase1 pre MY97 ECUs.

Chris

{Edited to add}

This is not compatible with the 97-98 ECU Scoobies.

[Edited by Chris.Palmer - 2/10/2003 8:05:57 PM]