Help-Engine missing when cold
03 November 2002, 04:17 PM
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2001
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Can someone please help me with this annoying problem.
It only happens when the car is cold, and right up till its at full running temp. If its any help i have a K'N cone filter. If its a sensor that is the problem, has anyone got any pics of where it is as i am new to these boxer engines.
Thx. dash
It only happens when the car is cold, and right up till its at full running temp. If its any help i have a K'N cone filter. If its a sensor that is the problem, has anyone got any pics of where it is as i am new to these boxer engines.
Thx. dash
04 November 2002, 06:00 PM
#4
Scooby Regular
Join Date: Jul 2001
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
you will need to explain the symptoms a bit better to get a good answer theses cars are very fickle and there is the maf or idle valve or temp valve and so on all clc cause a prob try to get it on a select monitor to check the sensors
05 November 2002, 05:53 PM
#7
Scooby Regular
Join Date: Dec 2001
Posts: 3,418
Likes: 0
Received 0 Likes
on
0 Posts
Mine is doing the same and has gone since adding extra earthing..
So far anyway..
I suspect I have a coil pack going as it is a pre-97 car..
Might be worth doing the earthing mod as being discussed in another thread.. will add link in a minute..
Although I am sure I have only delayed the problem rather than solved it..
JGM
So far anyway..
I suspect I have a coil pack going as it is a pre-97 car..
Might be worth doing the earthing mod as being discussed in another thread.. will add link in a minute..
Although I am sure I have only delayed the problem rather than solved it..
JGM
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
hedgecutter
General Technical
3
25 September 2015 02:35 PM